just wondering will a sizer that fits a RCBS press ,fit a Star/lee sizer press , in other words are the dies interchangeble between the diffrent sizing/lube presses
Daniel

quote:

Originally posted by M 98:
just wondering will a sizer that fits a RCBS press ,fit a Star/lee sizer press , in other words are the dies interchangeble between the diffrent sizing/lube presses
Daniel

The only ones that are interchangeable are the ones between the RCBS and Lyman luber/sizers. Star are totally different. The Lee push through type screw into your reloading press and are different then the other three.

The Star is one of the best luber/sizers, but more expensive. The dies are more expensive also. Some claim unless you are going to be doing a very large amount of sizing, the RCBS and Lyman is a better choice. You can change dies faster in the RCBS and Lyman also.

Redding/Saeco sizer/luber is different from any of the others.

Jim

Thaks guys, much appreciated
Daniel

i haven't used a star, but i have a lot of experience with the rcbs unit. when i discovered lee's tumble lube and push-through sizing, i retired the lubrisizer. dies cost less and are easily opened up for custom diameters. also, the process is less time consuming and bullet performance is good at velocities up to the 1800 fps i normally use.

wanna buy an rcbs lubrisizer and assorted dies?

budman

Yo Budman,

what dies do you have, and how much we talking?

Rich
Buff Killer

idaho rich,

i was kidding about the lubrisizer and dies sets, but if you're still interested the sizers are:
.284
.308
.311
.356
.357
.410
.430.

swc top punches for .357, .410, .430 and round nose designs for the rifle calibers, with lubricant...

send me an e-mail @ budhesler@yahoo.com