one of us
| |
| Posts: 2924 | Location: Arkansas | Registered: 23 December 2002 |
IP
|
|
one of us
| |
| Posts: 424 | Location: Bristol, Tennessee, USA | Registered: 28 September 2003 |
IP
|
|
One of Us
| One right in TN...http://www.wideners.com |
| |
one of us
| They're right down the road from me, and I like them, but surplus powder isn't a big item for them. They carry a pretty limited selection and their prices are higher than Hi-Tech's, generally. |
| Posts: 424 | Location: Bristol, Tennessee, USA | Registered: 28 September 2003 |
IP
|
|
One of Us
| NotRicochet....They are right up the road from me. You're right they don't have alot of surplus and maybe that will change, dunno. Anyways I bought a jug of 844, which is shooting fine for my purposes, for $49 with no shipping or hazard fees. Hi Tech wants $64 plus shipping and hazard fees for the same powder. So wideners beat them on that one and who knows if they stocked more.
Joe |
| |
one of us
| I've bought stuff off and on from Jeff Bartlett for 20 years or more with total satisfaction. The one batch I bought recently from Pat's Reloading was fine.
I do stay away from pulldown powder as much as possible. Rather pay the few extra bucks for the never loaded stuff. It's far more likely that the bulk powder has been properly stored. |
| Posts: 1570 | Location: Base of the Blue Ridge | Registered: 04 November 2002 |
IP
|
|
one of us
| OTOH, the never-loaded powder was often rejected because it didn't meet specs. The pulldown stuff got loaded because it did, and probably still does. All powder will eventually deteriorate, though. Jeff Bartlett and Hi-Tech sell good stuff. I'm sure Pat does, too. BTW, when powder is giving off red fumes it's in grave danger of self-igniting. Ideally the stuff should be stored in a cool place, outside the house, in a container that won't hold pressure if it does catch fire. Someone recently mentioned storing powder in an old refrigerator, and that's an EXCELLENT idea! The rate of deterioration goes up pretty much exponentially with temperature, and the usual accelerated aging tests are done at 65 degrees C. A hot shed or attic could approach that. Those hot tests will cause powders to deteriorate in a matter of weeks. |
| Posts: 424 | Location: Bristol, Tennessee, USA | Registered: 28 September 2003 |
IP
|
|