THE ACCURATERELOADING.COM OPTICS FORUM


Moderators: Canuck
Go
New
Find
Notify
Tools
Reply
  
M8 Leupold adjustments.
 Login/Join
 
one of us
posted
Guys,
Anyone know for sure what the graduations of each hash mark is on the older Leupold M8 2.5x, 4x and 6x scopes? Unsure whether they are 0.25MOA or 0.5MOA?
Thanks...
Con
 
Posts: 2198 | Location: Australia | Registered: 24 August 2001Reply With Quote
one of us
posted Hide Post
I love the old M8's and Vari-X's, but the graduations on the adjusment scales will always remain a matter of mystery. Sometimes, it appears that the same scale was used with different scopes which had entirely different movement per rotation. At any rate, when adjusting an older Leupold, I always assume that the graduations are 1/2 MOA and thus make smaller adjustments. This is something you'll just have to prove by actually shooting (or using a scope collimator might tell the tale.) However, once you determine how much each graduation moves the POA, the adjustments will be very consistent.
 
Posts: 13274 | Location: Henly, TX, USA | Registered: 04 April 2001Reply With Quote
One of Us
Picture of ACRecurve
posted Hide Post
Shame they didn't mark each dial with adjustment info! Surely that wouldn't have cost more than a few cents per scope.


Good hunting,

Andy

-----------------------------
Thomas Jefferson: “To compel a man to furnish funds for the propagation of ideas he disbelieves and abhors is sinful and tyrannical.”

 
Posts: 6711 | Location: Oklahoma, USA | Registered: 14 March 2001Reply With Quote
One of Us
posted Hide Post
my M8 6x42 is 1/2 MOA with each mark
 
Posts: 120 | Location: West Slope, CO | Registered: 14 December 2005Reply With Quote
One of Us
posted Hide Post
My old 4X shocked me. t is 1" per graduation!
 
Posts: 60 | Registered: 07 January 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia