13 March 2014, 02:35
larrys01unertl scope repair
Does anyone know where I can get the crosshairs replaced on a unertl scope?
I've sent several to " Parsons Scope Service "
http://www.parsonsscopeservice.com
13 March 2014, 16:51
larrys01I started out with a google search. Called Iron Sight. They have two phone #'s. Called the 1st one, message said to call the 2nd one. Left message on 2nd number. No reply so far. Called Parsons. That are shutdown for the time being
Ive read positive review of the below, but haven't personally done any business with them.
http://www.scopedot.com/id6.html"We do not do scope repairs unless it is reticle related!" 14 March 2014, 06:42
sambarman338I thought I posted yesterday regarding Iron Sight Inc but see no sign of it now.
They apparently refurbished a Nickel scope for $100 before I bought it. That was pretty cheap, I think, and the scope seems to be in good condition now.
14 March 2014, 07:34
larrys01I got tried of trying to find someone to work on them so I bought some .0015 wire and done it myself. Quite a challange, but I got it done.
16 March 2014, 05:59
sambarman338I hope you did it in a dry atmosphere. Were I to pull a scope to bits, I'd do it in front of an air conditioner. I've seen the humidity drop from 70 to 40 per cent in maybe five minutes there.
31 March 2014, 00:12
butchlambertI'm thinking Parsons closed the doors. Ironsight quoted me a year lead time on cross hairs. Joe Ruth in Florida did mine in short order.
wjruth@verizon.net
31 March 2014, 00:23
larrys01It's nor hard to repair them once you get used to working with the wire. I used .0015 dia. I think the .0005 dia. might be a lot harder to do.
01 April 2014, 15:03
lkscoperepaircross hairs on a target scope are not bad to do with medium wire.00005. But the cross hairs in them is normally fine and much harder to do. we repair all brands of scopes foreign and domestic. we can be contacted at lkscoperepair@hughes.net. Or our website at www. lkscoperepair.com
Larry
over 36 years fixing scopes
quote:
Originally posted by lkscoperepair:
cross hairs on a target scope are not bad to do with medium wire.00005. But the cross hairs in them is normally fine and much harder to do. we repair all brands of scopes foreign and domestic. we can be contacted at lkscoperepair@hughes.net. Or our website at
www.lkscoperepair.comLarry
over 36 years fixing scopes
I've had a few scopes cleaned & repaired by "lkscoperepair ". I'll be sending a few more
Hmmm.. PARSONS ??
