THE ACCURATERELOADING.COM OPTICS FORUM


Moderators: Canuck
Go
New
Find
Notify
Tools
Reply
  
Need scope with a small rear objective bell
 Login/Join
 
One of Us
Picture of doctorxring
posted
I've got a project rifle. A K98 Mauser that
I picked up that has standard Redfield bases
with extra high rings on it. I'm trying to
find a scope that will be clear when the bolt
is pulled. I picked up a Weaver K4 and it
almost works, but not quite.

I need a scope that has a 1.4 inch or less
diameter on the rear objective bell.
(standard 1" diameter scope tube).

Any ideas ?

thanks! Chris


Happiness is a tight group
 
Posts: 1524 | Location: Don't Mess With Texas | Registered: 02 January 2006Reply With Quote
one of us
posted Hide Post
Leupold ultralight/compact scopes did/do have a 1.4 ocular.....the other versions have 1.6 in the ones I have......the 4x and 3-9EFR I have measure at the 1.4......hth..good luck and good shooting!!


bigdaddytacp
 
Posts: 687 | Location: Jackson/Tenn/Madison | Registered: 07 March 2001Reply With Quote
One of Us
Picture of doctorxring
posted Hide Post
Thanks BigDaddy !

Got'r done.


Happiness is a tight group
 
Posts: 1524 | Location: Don't Mess With Texas | Registered: 02 January 2006Reply With Quote
one of us
posted Hide Post
The prior line of Leupold Compacts had a smaller ocular, however I understand that the current line of Ultralights that replace the Compacts has a "regular" sized ocular.

Another possibility would be to find a Leupold or Lyman Alaskan. They had a 7/8" tube and smaller overall dimensions.
 
Posts: 13260 | Location: Henly, TX, USA | Registered: 04 April 2001Reply With Quote
one of us
Picture of dogcatcher223
posted Hide Post
I would just change out the bolt handle, and get the scope I wanted. Bolt handle clearance is common on Mausers.
 
Posts: 525 | Registered: 21 December 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia