The Accurate Reloading Forums
The 404 With Different Powders

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/1411043/m/868104651

06 December 2004, 07:00
Saeed
The 404 With Different Powders
Gentlemen,

I thought I will give you a recap of these loads.

Only ONE round was fired with each load, as we did not have enough bullets to do a complete load development.

We will do that as soon as we have our new lathe operational.

Norma brass, Federal 215 primers and 405 grain Walterhog bullets. Over all cartridge length was 3.680", and the velocity is measured on a Oehler 35P chronograph, about 12 feet from the muzzle.

H380
80 - 2352
82 - 2377
84 - 2440
86 - 2450

VVN165
85 - 2117
90 - 2268

VVN560
84 - 2199

H4831sc
97 - 2487

Reloader 19
88 - 2300
90 - 2363
93 - 2463

H450
90 - 2368
93 - 2425
95 - 2479

VVN 540
75 - 2309
78 - 2379
81 - 2487
83 - 2534
85 - 2588

H414
80 - 2277
83 - 2357
85 - 2388

H4350
82 - 2258
85 - 2352
88 - 2415
90 - 2478
92 - 2507
94 - 2573
96 - 2610

WMR
90 - 2190
06 December 2004, 07:52
D Hunter
I almost hate to post, lest I open up a war on case capacity or some other such bull$h&t, I know some others have loads and velocities using Varget and Re 15. These are the powders that I have in abundance. Would you guys with this data please post it? Thanks.
06 December 2004, 07:55
maxman001
Quote:

I almost hate to post, lest I open up a war on case capacity or some other such bull$h&t, I know some others have loads and velocities using Varget and Re 15. These are the powders that I have in abundance. Would you guys with this data please post it? Thanks.



Yeah that would be cool, but this is great stuff so far!!
06 December 2004, 17:58
Saeed
Are you trying to open a hornets's nest?

I will post our Varget loads later today, and try some Reloader 15 for you.
07 December 2004, 04:45
maxman001
Any excuse to load and shoot
07 December 2004, 07:14
D Hunter
Saeed. Donkey, donkey. Buya donkey. Or some such.
07 December 2004, 07:16
Atkinson
Saeed,
How can you get 2600 with 4350, I have been advised by all manner of experts on this board that 2600 FPS cannot be done without total world destruction!! dumb ole Camel jockey!

Now don't all you nay sayers get your bowells in an uproar and mad at ole Ray, he is just goughing you a little in fun!
07 December 2004, 07:28
Saeed
Ray,

I have just fired one round with 75 grains of Reloader 15 and got - I think - 2304 fps.

I will try a few more tommorrow.

So now we have two powders that have actually exceeded 2600 fps, and some that came pretty close.

I think I only have about half a dozen or so bullets left, and will try them tomorrow and post the results here.