The Accurate Reloading Forums
Tell me about the .458 Lott

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/1411043/m/7361034

13 August 2001, 12:24
Oldsarge
Tell me about the .458 Lott
Bob,
I am beginning by putting all of ALF's (and everyone else's) photos on disk. Then I can begin my text and add the photos as I learn desktop publishing. Fortunately, I have a Microsoft-certified brother-in-law and a very computer literate sister . . . so I'd better bring the nephew into this project . It will be forthcoming but it will take a bit. Please be patient.
Sarge
13 August 2001, 13:38
Longbob
Patient! This is gonna be tough, but I am sure worth the wait. Can you give us a teaser?
13 August 2001, 19:55
470 Mbogo
[QUOTE]Originally posted by Oldsarge:
Hi Oldsarge,
This is the list of cartridges that I have if you tell me which you would like taken together I'll take some picture and forward them to you. 375 H&H, 416 Taylor, 416 Rigby, 404 Jeffery, 458 Win, 450 Ackley, 460 Weatherby, 450 Rigby 425 Westley Richards, 500/450 Nitro , 470 Nitro, 475 Number2, 476 Nitro, 470 Mbogo, 500 A-Sqaure, 500 Jeffery, 505 Gibbs, 577 Nitro, 600 Nitro and 700 Nitro
If that helps you out at all with your new project let me know. I posted to you on the big bores postings under the 40 cal stopping rifles I think it was. Oops I had one of those over fifty brain farts. I'll go check and see what it was. 470 Mbogo
It was the What caliber is the cutoff for a stopping rifle. 470 Mbogo

[This message has been edited by 470 Mbogo (edited 08-13-2001).]

14 August 2001, 04:16
Oldsarge
Thanx a million!

Class I
375 H&H,

Class II magazine
416 Taylor,
416 Rigby,
404 Jeffery,
458 Win,
425 Westley Richards


Class II double rifle
500/450 Nitro,
470 Nitro,
475 Number2,
476 Nitro,

Class III
450 Ackley,
450 Rigby
500 Jeffery,
505 Gibbs,

Class IV
460 Weatherby,
470 Mbogo
500 A-Square,
577 Nitro,
600 Nitro
700 Nitro

Thanx again
Sarge



[This message has been edited by Oldsarge (edited 08-13-2001).]

14 August 2001, 05:10
loud-n-boomer
Oldsarge:

If you are interested, and can get the article completed by around the end of September, we would be happy to include it in the Accuratereloading Africa Book.

l-n-b

14 August 2001, 05:50
Longbob
Sarge,

Thanks. The shakes have gone away for a while.

14 August 2001, 06:57
Oldsarge
l-n-b,
End of September? That may be pushing it but I'll give it a try. I was hoping to get it published in a magazine but a book is even better.
Sarge