04 November 2004, 17:16
nopride2Re: Hardcast bullets and DG revisited
No mention of hardness on their website. I'll take their testamonials with a grain of salt. I agree with Canuck that a hard cast bullet behaves like a solid. When discussing the relative merits, or lack thereof, of various bullets, one should keep in mind, eventualy they will all fail.
Dave
04 November 2004, 04:05
GeorgeSNo, no, no, no, no, no! They should have knocked 850fps off that velocity, and THEN it would have worked! No, wait, knock 1500fps off and the bullet would have worked better!
Wait, they should have THROWN the bullets at the buffalo; it would have penetrated clear through to Mozambique!!

George
04 November 2004, 04:18
GeorgeSAlf,
Do they make .475" bullets? Are they generally available in gun shops over there? Just curious.
George
04 November 2004, 06:07
500grainsA loyal follower of the hardcast bullet religion will not questions the assumptions of that faith.
04 November 2004, 08:17
GanyanaWe had five failures out of five with 600grn frontier bullets on last years proficiency exam. Fired at between 1750fps and 2000 fps from sundry .458 Win and .458 Lott's.
They are a good practice bullet, but buy them in the standard weight for your rifle. The big flat nose makes them great for shooting plainsgame with - if you are one of those that uses your DGR for all hunting!
04 November 2004, 11:11
Pete EGanyana,
When you say five failures, what do you mean? Five wounded animals? Five failures to feed? or something else?
Regards,
Pete
04 November 2004, 11:23
CanuckIn all seriousness, I am curious how "hard"-cast these bullets actually are. I have been shooting cast bullets that act much more like a solid than is evidenced by the results shown with the Frontier bullet above.
Canuck
04 November 2004, 11:31
GeorgeSBuffalo spines are tough on bullets. I had a .475" 500gr. Woodleigh flatten completely and lose all semblance of integrity on the spine of the buff in the photo below.
Shit happens.
George