The Accurate Reloading Forums
416 solids GS CUSTOM/Northfork

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/1411043/m/5051096672

17 December 2023, 16:57
M 98
416 solids GS CUSTOM/Northfork
Any one still using the 416 solids either North fork and / or GS Custom
17 December 2023, 20:54
ledvm
I only shoot these Cutting Edge bullets now days.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
J. Lane Easter, DVM

A born Texan has instilled in his system a mind-set of no retreat or no surrender. I wish everyone the world over had the dominating spirit that motivates Texans.– Billy Clayton, Speaker of the Texas House

No state commands such fierce pride and loyalty. Lesser mortals are pitied for their misfortune in not being born in Texas.— Queen Elizabeth II on her visit to Texas in May, 1991.
17 December 2023, 21:54
Hasher
Original Barnes Flat nosed Solids or TBSH for me.


DRSS
Kreighoff 470 NE
Valmet 412 30/06 & 9.3x74R
17 December 2023, 22:05
crbutler
Yes, I still use the Northforks.

They were pretty hard to find for quite a while.
18 December 2023, 02:45
DLS


After this performance on a dry land hippo, which was angling sharply away as it ran, with a 400 grain 416 Cutting Edge solid, I’ll be sticking with this bullet whenever using solids. It penetrated over 4 feet, including transiting about 18” of spinal column and was found lodged in the back of the skull. I could load it and shoot it again.