Go | New | Find | Notify | Tools | Reply |
One of Us |
Anyone have a magnum mauser source? I want it to cost under $1000 as I plan on throwing the floorplate away and going with blackburn. I am going to build a totally rediculous 9.3x70 rifle. Then I am going to build it two brothers in 300 H&H and 500 Jefferys. I am thinking outlout; $1000 for the action $500 for the floor plate $750 for a 1/2 octagon barrel job $300 for 3 pos safety (if it doesn't have it) $250 for the barrel band. $600 for sights from NECG $1500 for a handle from American Gun Stock Co. $250 for good blue and polish $300 for a good checkered bolt knob and install Wait a minuite that's almost $4000 what's Empire charge? | ||
|
one of us |
I have built 2 500Jeffrey's on Charles Daly actions. They have held up beautifully for me and cost under $400 with a decent trigger and fairly smooth bolt. Hair, not Air! Rob Martin | |||
|
one of us |
You don't say if you want to buy within the US or outside etc - but I was Sabi Rifles in Nelspruit the other day & they have some nice actions there - If you had them build the rifles from scratch I would think they would undercut the budget you mention....... take a look at http://www.sabirifles.co.za if you want to know more or want to see some of their work. They built me a .500 Jeffrey a few years ago and I'm delighted with it....... | |||
|
one of us |
Chas Daly Action +/-$400 depending on source: Dakota Arms SS safety-$145 @ Brownells NECG Rear site-$125 @ Brownells NECG Front site-$34 @ Brownells NECG Blades-$25 @ Brownells London Guns Pre Tapered BBL band-$50 @ Brownells Boyd's JRS Classic stock, xxx grade black walnut, Pachy Decelorator, Inletted for Mauser-under $500 Seems to me $4000 is a bit high, even allowing extra for the bbl you want and a steep $1000 for gunsmithing work Hair, not Air! Rob Martin | |||
|
One of Us |
HHMAG, Your my hero! The actions are great, do you think they would fit the 404 Jeffery case? The barrels are damn light for a 458, let a lone a 375. I see many new custom mausers in the safe, based on Chaz Daly actions. My math with your parts and my stock (Boyds doesn't make one for a dropped mag) is a little more, but I can make it work. | |||
|
One of Us |
Yes. /////////////////////////////////////////////////////////////////////////// "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill | |||
|
one of us |
hey that charles daly action looks real familiar, i have a very cheap german 30-06 that has an action just like that. Full mauser action with side safety, instead of the flag safety, long mauser bolt with gas shield. do you know whether these daly actions are made in the states or in europe? Mine actually says oberndov on the side hinting at german/east origin. anyway its an oldie, but is a pretty good tool. If the work can be done that well and economically, it may be worth me custom building in the states to the ship to africa. my rifles live in south africa with my dealer and PH there. also i have tried getting in touch with sabi rifles and their email is not recieving, will try calling in stead as their web forms are out too. cheers. tm "one of the most common african animals is the common coolerbok(or coleman's coolerbok). Many have been domesticated and can be found in hunting camps, lodges and in the back of vehicles." | |||
|
one of us |
why dont you just get a action from PRECHTAL/GOLMATIC...about $2500 U.S and when your rifle will be finished it will ooze quality and in the long run will be the CHEAPEST !but best rifle you have ever built im talking from experiece daniel | |||
|
One of Us |
A custom American mauser could be had for $2500 as well, but I am in the military and trying to save a few $$$$$. Less on new rifle = more dead animals with new rifle! | |||
|
one of us |
By the time you get your finished rifle it will be 2010. Never mind the money. Easy come easy go. In the mean time buy a Ruger RSM and it will get the game. Here is one for under $900 complete with immediate delivery. https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/355103682 Join the NRA | |||
|
one of us |
D99, I have built 2 404's on Daly actions. I am currently building my third 500 J on one. The bolt face will handle it fine. I have Boyd's stocks on all but 3 of my 14 Mausers and they handle dropped floorplates admirably. They Daly actions are I beleive (could be wrong, it's happened once or twice before) made in the old VZ or BRNO factory. New BRNOs share much of the tooling with the CZ, but I think these are made in one of the old wartime factories. They are very solid, the bolts take a minimum of raceway polishing to smooth out quite nicely, and there is a bunch of extra metal in the front web area. I began using them a while back along with 1917 Enfields to do custom rifles and I haven't been dissappointed yet. Hair, not Air! Rob Martin | |||
|
One of Us |
Thanks HHMAG! | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia