The Accurate Reloading Forums
AR-15 trigger in an AR-10

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/132105729/m/8091089101

29 January 2009, 19:31
Collins
AR-15 trigger in an AR-10
Will this work, Will any aftermarket AR-15 trigger kit fit into an AR-10. I have an r-25 in .243 but the trigger is terrible. Most of My AR's have a 2 stage. So, is it do-able?


Collins
Airgunner / 458 SOCOMer/ 45-70er / 458 Lotter

www.actionairgun.com LIVE NOW

29 January 2009, 21:09
starmetal
quote:
Originally posted by Collins:
Will this work, Will any aftermarket AR-15 trigger kit fit into an AR-10. I have an r-25 in .243 but the trigger is terrible. Most of My AR's have a 2 stage. So, is it do-able?


Triggers are the same so you're good to go. I fairly good two stage trigger is the RRA (Rock River Arms) and it's not priced bad. Just make sure your securing pins for the trigger and hammer are the correct size as there are two different sizes because of Colt.
17 February 2009, 00:54
Collins
Just about to drop a 2 stage Jewell in. I'll tell you how it goes.


Collins
Airgunner / 458 SOCOMer/ 45-70er / 458 Lotter

www.actionairgun.com LIVE NOW

17 February 2009, 03:00
BECoole
The only "gotcha" to AR-15 triggers in AR-10 rifles is the hammerspring. The hammerspring on some of the aftermarket triggers isn't heavy enough to reliably light up .308s.
Single stage JPs come to mind.