THE ACCURATERELOADING.COM MODERN MILITARY RIFLES FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Modern Military Rifles    Any experience with the Colt H-Bar Elite?
Go
New
Find
Notify
Tools
Reply
  
Any experience with the Colt H-Bar Elite?
 Login/Join
 
One of Us
posted
I've been thinking about a .223, like the looks of the Elite. Any issues I should know about? Reviews? Are they generally sub MOA?


Doug
 
Posts: 862 | Registered: 18 January 2005Reply With Quote
one of us
Picture of tiggertate
posted Hide Post
Mine has been a joy. All it needed was a good trigger.


"Experience" is the only class you take where the exam comes before the lesson.
 
Posts: 11143 | Location: Texas, USA | Registered: 22 September 2003Reply With Quote
One of Us
posted Hide Post
Tigger, I understand the Colt triggers can be problematic to upgrade due to the size of the pins. With what did you replace yours?


Doug
 
Posts: 862 | Registered: 18 January 2005Reply With Quote
one of us
posted Hide Post
Three of my friends have had the Elite.

All of them shot very good.


DOUBLE RIFLE SHOOTERS SOCIETY
 
Posts: 16134 | Location: Texas | Registered: 06 April 2002Reply With Quote
One of Us
posted Hide Post
last one i had shot well for about 500 rds and went south
 
Posts: 13466 | Location: faribault mn | Registered: 16 November 2004Reply With Quote
one of us
Picture of tiggertate
posted Hide Post
quote:
Originally posted by nyrifleman:
Tigger, I understand the Colt triggers can be problematic to upgrade due to the size of the pins. With what did you replace yours?


I used Timneys in two Colts; one was an early SP1 and the installation was almost as simple as a Remington 700 trigger. The Elite was a later Colt with the hardened steel block insert to prevent full auto parts installation.

That one was a different story in that the block has to be removed, milled to clear the trigger assembly and reinstalled. I don't know if that applies to other "drop-in" trigger assemblies.

But the trigger is nice and comparatively reasonable as it requires no tweaking, just installation.

The pins size itself isn't problematic, there are only two of them. All of the aftermarket triggers come with either pin size. The Timney assembly has two set screws which bear on the trigger pin to secure it. It's simple and effective.


"Experience" is the only class you take where the exam comes before the lesson.
 
Posts: 11143 | Location: Texas, USA | Registered: 22 September 2003Reply With Quote
One of Us
Picture of 308Sako
posted Hide Post
I own 2 of them and have had nothing but exceptional luck with them

AFTER CHANGING THE TRIGGERS.

Edit to add: This rifle was originally purchased at the now defunct Pistol Parlor near Albany, New York.

Best ever group with 77 Sierra MK's at 405 yards: Witnessed



Next day one of the witnesees shot this at 300 yards, same load and rifle:







Member NRA, SCI- Life #358 28+ years now!
DRSS, double owner-shooter since 1983, O/U .30-06 Browning Continental set.
 
Posts: 3611 | Location: LV NV | Registered: 22 October 2002Reply With Quote
One of Us
posted Hide Post
I took a screenshot of your group, Sako, printed it and scaled it. You shot, for all intents and purposes, a 1.00" group-- from 400-plus yards. That is eyes-bugging-out accuracy. I am super-impressed. Just awesome...
 
Posts: 16534 | Location: Between my computer and the head... | Registered: 03 March 2008Reply With Quote
one of us
posted Hide Post
My freind has one of the first ones that came out its a half inch gun with good ammo. It a good p dog gun but one tends to go through more ammo then with a bolt gun Wink
 
Posts: 19847 | Location: wis | Registered: 21 April 2001Reply With Quote
One of Us
posted Hide Post
Bought one in 1989, my best AR 15 ever. A pure joy with Swiss made 63 grains ammo and handloaded Sierra MK 69 grains ammo.
 
Posts: 157610 | Location: Ukraine, Europe. | Registered: 12 October 2002Reply With Quote
One of Us
Picture of 308Sako
posted Hide Post
quote:
Originally posted by homebrewer:
I took a screenshot of your group, Sako, printed it and scaled it. You shot, for all intents and purposes, a 1.00" group-- from 400-plus yards. That is eyes-bugging-out accuracy. I am super-impressed. Just awesome...


I figured it at about .184 MOA, and was amazed myself. I always considered it to be an easy 1/2 MOA rifle and occasionally a 3/8's with the 69 MK's and VV 135, but that was an exceptional effort!






Member NRA, SCI- Life #358 28+ years now!
DRSS, double owner-shooter since 1983, O/U .30-06 Browning Continental set.
 
Posts: 3611 | Location: LV NV | Registered: 22 October 2002Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Modern Military Rifles    Any experience with the Colt H-Bar Elite?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia