THE ACCURATERELOADING.COM SHOTSHELL RELOADING FORUM

Go
New
Find
Notify
Tools
Reply
  
Mec 9000G 20ga.
 Login/Join
 
one of us
Picture of alleyyooper
posted
I have had my Mec 9000G for over 20 years. Has been a good working reloaders for me if I kept it clean and lubed.

Recently I was having a problem with the advance jumping so hard shot would fly out of thr hulls.

I decided to do a total tear down to clean it and apply grease where required and anti sezie.

When I reassembled it it was still jumping. When readding all the trouble shooting tips it said to adjust the cam nut. I have tried it on every set and it still jumps.

Any one have any idea what I am missing. Proper settings?

I also have a 12ga Mec 9000G and it works very well but is a year newer than thr 20ga model.

Thanks in advance


Big Grin Al


Garden View Apiaries where the view is as sweet as the honey.
 
Posts: 505 | Location: Michigan, U.S.A. | Registered: 04 December 2001Reply With Quote
one of us
posted Hide Post
Call Mec they were very helpful in getting my 9000g properly timed.

Talked me through it on the phone.
 
Posts: 16035 | Location: wis | Registered: 21 April 2001Reply With Quote
one of us
posted Hide Post
you've probably worn something down to the point some metal has galled.

if you don't get enough help at MEC go to shotgun world.com and look for a thread on MEC troubleshooting by Curly N
or post up your problem on the forum there.
I can guarantee a couple of guy's there know the machines better than the factory guy's do.

I ain't no help, I gave away all but one of my MEC's some time back.
 
Posts: 3202 | Location: soda springs,id | Registered: 02 April 2008Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2020 Accuratereloading.com


Visit our on-line store for AR Memorabilia