THE ACCURATERELOADING.COM SHOTSHELL RELOADING FORUM

Go
New
Find
Notify
Tools
Reply
  
Thanks Saeed & Don
 Login/Join
 
one of us
posted
Thankyou Saeed and Don. cheers
 
Posts: 412 | Location: Iowa, for now | Registered: 18 July 2005Reply With Quote
one of us
Picture of vapodog
posted Hide Post
thumb thumb


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
posted Hide Post
Same here!
 
Posts: 179 | Location: No. Idaho | Registered: 23 June 2000Reply With Quote
one of us
posted Hide Post
Sweet Smiler Just finished cutting down a bunch of Fiocchi 2.75in hulls to 2.5in for some low pressure, 7/8oz 16ga loads for my English double.
 
Posts: 677 | Location: Florida | Registered: 04 January 2005Reply With Quote
Administrator
posted Hide Post
Gentlemen,

You are very welcome.


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 60519 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
Moderator

Picture of Mark
posted Hide Post
VFR,

Are you going to roll crimp or do you have a method of putting a star crimp on short shells?


for every hour in front of the computer you should have 3 hours outside
 
Posts: 7680 | Location: Between 2 rivers, Middle USA | Registered: 19 August 2000Reply With Quote
one of us
posted Hide Post
Mark, I use a six point crimp. Mec makes an adapter to convert the press to load 2.5in shells. I ordered it directly from them. Bob
 
Posts: 677 | Location: Florida | Registered: 04 January 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2022 Accuratereloading.com


Visit our on-line store for AR Memorabilia