410 loads
new member
I'm looking for some 3/4oz loads in 410 using remmington 3" express shells. Any help would be a big help thanks in advance......lost
Posts: 11 | Location: N.C. | Registered: 22 August 2003Reply With Quote
one of us
posted Hide Post
The following was taken from the Hodgdon powder site.

Shot amt. ------Powder------Primer----Wad----charge / velocity

11/16 oz. LIL'GUN Rem. 209P Rem. SP410 12.8 gr / 12,900 PSI
11/16 oz. LIL'GUN Win. 209 WAA41 12.7 gr / 13,500 PSI
11/16 oz. H110 Rem. 209P Rem. SP410 15.0 gr / 11,800 PSI
11/16 oz. H110 Win. 209 WAA41 14.5 gr / 12,800 PSI

Chic Worthing
"Life is Too Short To Hunt With An Ugly Gun"
Posts: 4917 | Location: Wenatchee, WA, USA | Registered: 17 December 2001Reply With Quote
one of us
Picture of vapodog
posted Hide Post
use this info with caution as it's not in the book!!!

I loaded Remington 3" cases with 3/4 Oz of shot and the recipe called for 11/16 Oz This is about 60 grains extra pellets and it amounts to about 15 BBs

It worked well in my (very strong) Over/Under. I have no clue what the pressure was but it didn't show anything to be concerned about. IIRC I used H-110 powder. Again this is not in the books.

I remember years back that the 3" 410 used 3/4 Oz of shot in factory loads.

"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
  Powered by Social Strata  

Copyright December 1997-2022

Visit our on-line store for AR Memorabilia