THE ACCURATERELOADING.COM SINGLE SHOT PISTOLS FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Look What Was At The Post Office
 Login/Join
 
one of us
Picture of tred1956
posted
Went to the PO and lo and behold. A grin came across my face. Couldn't wait to get home and put it together. The gun is a Factory Unaltered AA easy open frame with a factory unaltered AA 357 Max 10 " barrel. It wears a Wanre 4 hole, weaver style base, with Burris Signature rings and a Brand New Bushnell Elite 2-6X 32mm matte black Handgun Scope. The furniture is from High Plains and features a Pegasus Grip (been wanting to try one of these for years) and 2" wide flat bottom target forearm in Saphire Laminate. I think the purple pops with the AA frame. Have 200 rounds of Remington 357 Max brass and will start load development shortly. Have some AA1680 I am going to play with.
Thanks for reading and feel free to offer any "Pert Load" you might have. I have some 125,140,158, and 180 grain JHP to experiment with.
Thanks for reading and any and all input is welcome
Doug





Enjoy life but remember, we are only practicing for something better.
 
Posts: 1604 | Location: South Carolina | Registered: 11 June 2008Reply With Quote
one of us
posted Hide Post
Good luck with your new "toy". I just sold my 10" 357 Max barrel, it was my primary deer gun when I lived in Illinois. I loaded the Hornady 180 XTP over a max charge of W296 powder.


Greg

NRA Endowment Life Member
the right of the people to keep and bear arms shall not be infringed.
Second Amendment, U.S. Constitution (1791)
 
Posts: 1224 | Location: Saugerties, New York | Registered: 12 March 2002Reply With Quote
one of us
Picture of Bill/Oregon
posted Hide Post
That looks like a lot of fun -- and in a caliber I have always wanted to mess with. I'll bet your new Contender will be accurate as heck.


I love dogs so much more than people.
 
Posts: 13220 | Location: Alamogordo, NM | Registered: 03 June 2000Reply With Quote
one of us
Picture of TCLouis
posted Hide Post
Amazing what the Max will do with just 10" barrel.



Don't limit your challenges . . .
Challenge your limits


 
Posts: 3894 | Location: TN USA | Registered: 17 March 2002Reply With Quote
one of us
posted Hide Post
I'm running a TC Encore with a 16 inch MGM, AA 1680 or LilGun along with 180 gr XTP or Rem 180 gr HP will take a Mich WT and turn it inside out.
 
Posts: 131 | Location: mid-michigan | Registered: 04 May 2008Reply With Quote
one of us
Picture of NormanConquest
posted Hide Post
I had a friend back in the 70's that had a TC w/ a 30/30 bbl.He would regale everyone on occasion with his dirty Harry rendition."O.K punk,this is the most powerful handgun in the world.So do you feel lucky punk?Ask yourself this question;did I fire one or none;feeling lucky punk?"


Never mistake motion for action.
 
Posts: 12867 | Location: Austin, Texas | Registered: 11 March 2013Reply With Quote
one of us
posted Hide Post
When I was still hunting I had a TC in .35 Remington. Not happy with that, I moved up to a 45-70. When I bought the 45-70 the seller gave me 50 rounds. A lifetime supply. 100 rounds. Anyone who's shot one of these off hand would understand that.
 
Posts: 451 | Location: Oregon | Registered: 03 January 2018Reply With Quote
one of us
Picture of NormanConquest
posted Hide Post
Someone posted a short flic here a few years ago of a guy shooting one in a 416 Rigby.Hilarious as he just kept backpeddling + the range roof doing an upper eruption from the gas.


Never mistake motion for action.
 
Posts: 12867 | Location: Austin, Texas | Registered: 11 March 2013Reply With Quote
one of us
Picture of Bill/Oregon
posted Hide Post
Tred, any range reports to share with us? As I mentioned, I have always admired the .357 Max but never shot or owned one.
Nobull, the heaviest hitter I ever had on a Contender frame was the .375 JDJ. It was quite "lively."


I love dogs so much more than people.
 
Posts: 13220 | Location: Alamogordo, NM | Registered: 03 June 2000Reply With Quote
one of us
Picture of packrattusnongratus
posted Hide Post
Still would like a report on this gun and caliber. It was always on a "short list". Be Well. Packy
 
Posts: 1803 | Registered: 28 May 2002Reply With Quote
one of us
posted Hide Post
I sold my 357 max. It was a contender 12” MGM barrel. I used XTP 180 grain. Don’t remember the powder.
Shot one antelope with it.


NRA Patron member
 
Posts: 2194 | Location: Minnesota | Registered: 08 December 2006Reply With Quote
one of us
Picture of NormanConquest
posted Hide Post
I remember when Bob Milek was writing for 'Guns + Ammo' in the '70s + the early 80s that he was a great proponent on the single-shot pistol platform. I never really got into it myself, one I am left-handed + the 1st shot out of the box (so to say) would be to buy new grips, + besides, it just never really interested me. That doesn't make it a bad idea by any means, it just didn't float my boat. Besides in the firearms world, I need another hobby like a hog that needs a sidesaddle.


Never mistake motion for action.
 
Posts: 12867 | Location: Austin, Texas | Registered: 11 March 2013Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2020 Accuratereloading.com


Visit our on-line store for AR Memorabilia