THE ACCURATERELOADING.COM KNIVES AND KNIFE MAKING FORUM


Moderators: Saeed
Go
New
Find
Notify
Tools
Reply
  
Damascus Sendero with scratches
 Login/Join
 
one of us
posted
This is the Sendero model with Damascus. The pattern of Damascus in the blade is a Dog Star pattern. The stainless guard is deep relief engraved. The handle is Sambar Stag. I sure hope they like it as long as it took to make it.



Keep the Pointy end away from you
www.jerryfisk.com
 
Posts: 448 | Registered: 28 August 2014Reply With Quote
one of us
posted Hide Post
Yes, it is dyed. When I finish the knife I then soak it in mineral oil for 12 hours.
I soak my own stag/ivory knives in oil twice a year to help prevent cracking.


Keep the Pointy end away from you
www.jerryfisk.com
 
Posts: 448 | Registered: 28 August 2014Reply With Quote
one of us
posted Hide Post
Wow, that would be absolutely gorgeous with elephant ivory. We should talk.
 
Posts: 475 | Location: Central Indiana | Registered: 22 February 2005Reply With Quote
one of us
posted Hide Post
drm, ubet they look good in ivory. I know a few years ago I extended the engraving from the guard onto the ivory. It was the first time I had engraved ivory.

I have used ele ivory, mammoth, hippo but the most stable ivory is walrus.


Keep the Pointy end away from you
www.jerryfisk.com
 
Posts: 448 | Registered: 28 August 2014Reply With Quote
one of us
posted Hide Post
That dyed Sambar Stag is killer. A work of art, as always.

Best,

GWB
 
Posts: 23752 | Location: Pearland, Tx,, USA | Registered: 10 September 2001Reply With Quote
one of us
Picture of Use Enough Gun
posted Hide Post
tu2
 
Posts: 17395 | Registered: 04 April 2005Reply With Quote
one of us
posted Hide Post
so how long did it take to make it?
 
Posts: 2059 | Location: Mpls., MN | Registered: 28 June 2014Reply With Quote
one of us
posted Hide Post
Lindy, I never keep up with it for sure. I know in a years time, full time, I make about 18, maybe 20 knives, it really depends upon how the orders were lined up for the year. I have made as few as 12.
Just the engraving such as this one takes about 25 hours or so per inch. Gold inlay adds another 5 hours or so, again, that is just for the engraving. I did up my SP snake pistol with full coverage to practice, I knew not to keep up with the time on it because that would just be depressing. Looks good for a snake shooter though. Smiler


Keep the Pointy end away from you
www.jerryfisk.com
 
Posts: 448 | Registered: 28 August 2014Reply With Quote
one of us
Picture of Lee Baumgart
posted Hide Post
lindy2,

I'm going to jump into Jerry's thread and ask you why you want to know how long it takes to make it?

For the knife maker the question is kind of a losing proposition. If Jerry tells it takes six hours (which obviously from his reply it takes a helluva lot more than six hours) he is overcharging. If Jerry tells you that it takes 100 hours, then the perception is that he is a poor business man. In my mind, it's a no-win situation and poor form to ask the question.

Lee
 
Posts: 569 | Location: Vancouver, WA | Registered: 28 June 2010Reply With Quote
one of us
posted Hide Post
Nice scratches!!!
 
Posts: 408 | Location: morgan city, LA | Registered: 26 February 2005Reply With Quote
one of us
posted Hide Post
That Damascus pattern is....striking.

Gorgeous knife.
 
Posts: 15739 | Location: Australia and Saint Germain en Laye | Registered: 30 December 2013Reply With Quote
one of us
posted Hide Post
thank you Lee, especially not having a clue as to what the knife sold for...
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005Reply With Quote
one of us
posted Hide Post
Thanks guys.
In the interest of education as I am several years backed up one like this knife sells for about $3200, it just depends upon engraving and handle materials. They can get on up there for those that desire that. My prices normally run from this one to up to a 6 figure one but those are not as common.
I am working on one now that is a 6 figure piece but as near as I can figure it the knife will take one and one half year of actual time to make and do that will take about 3 years of off and on to get it done. It has taken 4 years to gather the materials and I still have some coming in.
But, no, I do not keep up with how long it takes to make a knife. When it is done it is done. I started making knives I sold them for $8.00 each. It has been a long up hill struggle to learn what I have about my chosen field of life. I will never learn it all, just how to get better at what I do now. Most folks are not as interested in how long the surgery took as did it work or not. Knifemakers are the same, it makes no difference if it works.

I have a client that buys one knife every 3 years. It takes him that long to mow yards as a side job from his regular job to save his money as a grocery stock boy though it is 60 years old. He has never had much money. It is a struggle for him to get a knife. His knife is just as important as any other knife I make. I make no distinction between who the knife is made for, the knife will work and be as nice as I can make it for each person according to his wishes.


Keep the Pointy end away from you
www.jerryfisk.com
 
Posts: 448 | Registered: 28 August 2014Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2022 Accuratereloading.com


Visit our on-line store for AR Memorabilia