THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
416 Rigby 400gr SWIFT A V WOODLEIGH
 Login/Join
 
one of us
Picture of jorge
posted
Good morning, looking to see if anyone has done any tests with these bullets. I have real world experience with the A Frame on Buffalo (2), but now with the Woodleighs. The reason I pose this query is because on more than one occasion, I've heard Woodleighs are relatively soft, particularly at MVs exceeding 2150 or so.


USN (ret)
DRSS Verney-Carron 450NE
DSC Life Member
NRA Life Member

 
Posts: 7089 | Location: Orange Park, Florida. USA | Registered: 22 March 2001Reply With Quote
one of us
posted Hide Post
JOrge,
I have had excellent with both Swift and Woodleighs on Cape Buffalo and lots of them..My all time favorite in the .416 Rem is the 350 gr. Woodleigh, same in the 404..and most any solid produced to day works, but I favor the gS Customs flat nose solid..As to "soft", Woodleighs, Ive never heard of that except on the internet, and they have a great reputation in Africa and most that have used them, most all my clients that came to Tanzania used Woodleighs, none were soft, they do expand with long wings at times as designed, maybe to some that's soft but its a damn deadly soft in such cases..


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 35394 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
one of us
posted Hide Post
Have used 410gr RNSP in my Rigby since day 1.
MV on average with them is 2550fps, not a single one has ever coined or flattened excessively, they all come out as a perfect textbook mushroom.
I have 1 that has one side of it shaved off due to being recovered in the hip of an Aussie water buff, it passed from the brisket to the hip diaganolly. Stella performance in my book.
They certainly are not soft.

Cheers.
 
Posts: 666 | Location: N E Victoria, Australia. | Registered: 26 February 2009Reply With Quote
one of us
posted Hide Post
I had a few Woodleigh bullets coin on me in 2000-2002. That was Federal Ammunition with the 410-grain RNSP. I switched to 400-grain Swifts with total satisfaction.

About seven years ago, I heard that the Woodleigh bullets were tougher. I have just stuck with the Swifts because it is a better design. A copper gilding cover on a hard cast, heat treated core would be fine.

Test the Brinell hardness of the Woodleigh core. That would likely tell the story.


 
Posts: 7157 | Location: Snake River | Registered: 02 February 2004Reply With Quote
one of us
posted Hide Post
For the 416 Rigby, the Woodleigh manual recommends a velocity of 2350 to 2400 fps when using the 410 grain projectiles. Like all bullets they are designed for use within certain impact velocity ranges.

They also state that, "Over the years there have been many modifications. One major one was the development of the Protected Point line of soft nose bullets. There has also been a complete upgrade of jacket in 416, 404, and 505..."
 
Posts: 327 | Location: S. E. Arizona | Registered: 01 February 2019Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2020 Accuratereloading.com


Visit our on-line store for AR Memorabilia