THE ACCURATERELOADING.COM FORUMS

Go
New
Find
Notify
Tools
Reply
  
Checkering tool stand
 Login/Join
 
one of us
posted
While perusing through AR some time ago I saw a gunmaker's very well organized bench with a handy looking holder for his checkering tools (I can't seem to recall who's it was, and haven't been able to find the picture when I went back to get a closer look at the design). But that image stuck with me as I wallowed through the filth that is my workbench and after several weeks I decided to do something about it. Here's what I came up with today for the checkering tools. Now I just need to come up with a plan for the rest of the clutter Smiler

 
Posts: 397 | Location: Weathersfield, VT | Registered: 22 January 2017Reply With QuoteReport This Post
one of us
posted Hide Post
Nice Matthew, decluttering, utilizing excess wood laying around the shop, ingenuity, attention to detail, all necessary components of the trade, thanks for sharing. Here's my amateur attempt at declutter but with checkering results far different from a pro like you.
 
Posts: 376 | Location: Florida | Registered: 07 June 2013Reply With QuoteReport This Post
one of us
posted Hide Post
Way to show me up Jim! rotflmo
Looks great! I'm definitely going to be stealing this idea.
 
Posts: 397 | Location: Weathersfield, VT | Registered: 22 January 2017Reply With QuoteReport This Post
one of us
posted Hide Post
Just sharing ideas, nothing more and I stole the idea from somebody else. I think I recall the tool rack you are referring to, am thinking it was Dave Norin or perhaps Dennis Earl Smith, not sure, had the precision and layout of an operating room if I remember correctly. Maybe the person in question will see this thread and repost his pics. To be honest the end result is what matters, regardless of the set up.
 
Posts: 376 | Location: Florida | Registered: 07 June 2013Reply With QuoteReport This Post
one of us
posted Hide Post
Matt's is prettier!
 
Posts: 265 | Location: MN | Registered: 11 May 2011Reply With QuoteReport This Post
one of us
posted Hide Post
quote:
Originally posted by setters5:
Matt's is prettier!


Funny, and it is
 
Posts: 376 | Location: Florida | Registered: 07 June 2013Reply With QuoteReport This Post
one of us
posted Hide Post
Nice holder for the checkering tools.


If you do lots of checkering I will recommend making a similar set for air blowing the dust away as you checker. I have done so much over the years that an allergy to walnut dust will develop.

I use the MMC electric tool and as you may know the dust comes back into the nose area. You never need to stop to blow the dust away. After all time is money when you are full time gunsmithing. It takes a little time to get used to my style, but it will be worth the change over. If you need more info on making this air flow system it is on a PDF file and can be sent to you.
 
Posts: 909 | Location: Texas | Registered: 19 May 2004Reply With QuoteReport This Post
one of us
posted Hide Post
A friend of mine owns Springco USA + for his grinding, buffing, etc. he puts 2 gun cleaning patches up his nostrils in lieu of a mask. Simple fix. A mask always tends to fog up my glasses.


Never mistake motion for action.
 
Posts: 14280 | Location: Austin, Texas | Registered: 11 March 2013Reply With QuoteReport This Post
  Powered by Social Strata  
 


Copyright December 1997-2021 Accuratereloading.com


Visit our on-line store for AR Memorabilia