The Accurate Reloading Forums
Need some help - can someone make some measurements on a #1-V barrel?

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9421043/m/802100896

10 July 2007, 03:15
fireball168
Need some help - can someone make some measurements on a #1-V barrel?
Just picked up a #1-B in 204 Ruger this weekend.

Have no use for the caliber, looking to rebarrel - but need approximate dimensions for the #1-V barrel, can't find anybody that has one around here.

Length of straight taper in front of the receiver = ?

Is the front sight base on the same plane as the rear(O.D. the same at both spots?)

Barrel O.D. one inch from the end of the straight taper = ?

Muzzle O.D. at finished length (?) = ?

Thanks for the help, can't seem to find the Varmint contour listed on anybody's barrel making websites.
11 July 2007, 08:42
6.5BR
When I barreled mine, Pac-Nor had the dimensions I do believe and copied that pattern, although carried it to 26".

If you are dealing with a barrel maker they should be able to duplicate it.
17 July 2007, 06:29
fireball168
BTT - Need to know if both scope bases are on the same O.D.
18 July 2007, 04:27
scr83jp
Check with http://www.hartbarrels.com