The Accurate Reloading Forums
Ruger NO.1 Trigger Question
16 November 2020, 04:02
ElaltoRuger NO.1 Trigger Question
Hi All,
A friend has a Ruger RSI for sale, from his uncle's estate. I am interested, however, he nor I Know what the screws in the trigger are for. I attach a photo of the screws in the trigger and would appreciate any information you all can give me.
16 November 2020, 18:43
nopride2Looks like homemade overtravel stops.
Dave
17 November 2020, 19:05
dpcdNo, those are in all Ruger #1s; the front one is for weight and the back one is for overtravel. But they are just set screws; not sure what is in your picture.
22 November 2020, 22:39
Atkinsonthe way I see it, the screws are in the trigger itself and they are trigger overtravel stops..notice the striations in the trigger....
Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120
rayatkinsonhunting@gmail.com
22 November 2020, 23:08
dpcdRead what I said above; they are not both overtravel screws. They are factory and are two set screws.
29 November 2020, 18:12
jkingrphWhat Dpcd said, not trigger stop screws. Think, why would you need two for the same purpose. Those were found on earlier guns and later changed. I think the later models had one screw, but cannot remember exactly as non of mine no longer have the factory trigger. I replaced the factory trigger with some of the Moyer triggers which have the two adjustment screws as pictured above, and a few of the Kepplinger set triggers.
JJK
01 December 2020, 14:11
PhilDPCD is spot on. My 1A made in 2005 has the same two screws. Don't think I ever noticed them since they are fairly "high" up on the trigger. I bought this rifle second hand, but Ruger has a No 1 owner's manual online which I found by doing a serial number lookup. Not sure if this manual dates to the period of my rifle, but digging through it there are references to the screws in the trigger.
Ruger Serial Number Lookup No 1 ManualPage 15 - trigger adjustment warning includes a diagram showing them
Pages 29-30 - exploded diagram and parts list. Shows the screws as part numbers 20 (sear adjustment screw) and 31 (trigger spring adjustment screw)
07 December 2020, 02:50
AtkinsonWell they sure don't look like factory installed screws, looks more like a gunny butcher with a dremal..
In the scematic two screws are up high in the trigger and point straight up and seem to me to be not the same as the picture, the location and appearance is just different, surely thats obvious..
Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120
rayatkinsonhunting@gmail.com
07 December 2020, 16:13
p dog shooterJust looked at my No.1 I brought used in 1978.
It has two screws in the same location as the picture.
The only thing wrong with the screws and the holes, I see is someone might have bunged up them trying to adjust them.
Or they tried to do something else with them.
08 December 2020, 22:49
AtkinsonThe picture and the parts page seem to me are different in that in the parts page schematic are allmost straight up in the very top of the trigger????????Not so in the furnished photo! or so it appears to me..
Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120
rayatkinsonhunting@gmail.com
09 December 2020, 05:13
p dog shooterquote:
parts page schematic
I have found are never all that accurate.
09 December 2020, 08:18
LittlebluetruckIf you like the Ruger No1, but not it’s trigger, get the Jard model. I have only installed one, but it is really nice.
13 December 2020, 04:27
Alec Torresquote:
Originally posted by Littlebluetruck:
If you like the Ruger No1, but not it’s trigger, get the Jard model. I have only installed one, but it is really nice.
I have a Jard trigger in my Ruger No. 1 in 25-'06. Waiting for metal finishing, but the trigger is a big improvement.