I have a Luxus model 11 and was wondering what type of bore guide was best for the break open I also have a Blaser R93 I will be using the same guide for.Any suggestions?

Take a once-fired case and drill the primer pocket out, to your chosen cleaning rod diameter plus .025" or so. Insert the case into the breech and run the rod thru it.

Thats a great idea.Thanks for the help.

Hello, Bobby4211. As Idaho said..I too drill/ream out primer pocket for slip fit on rod. I also will solder or epoxy a brass bushing in case mouth for added rod guidence.
I have drilled out .22 L.R. case heads for this also..some of those extractors on the early single-shots..particularly the Ballard are both sharp and pointed! They will peel a coated rod like a banana first pass thru!

Thanks for the advice guys

Sinclare makes a variety of bore guides for different single shots.

Thanks F224 I looked on Sinclair's site and some of their guides will work better on my No 1's and their TC guides will work for my break opens without having to drill a case for each caliber and at $8 they're cheap enough