The Accurate Reloading Forums
What custom barrel makers are there for TC Encore shooters?

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9421043/m/233107501

24 August 2003, 18:17
<Embalmer>
What custom barrel makers are there for TC Encore shooters?
I have seen and bought from VVCG, looked at the Bellm and Bullberry sights and liked em all. But are there any other custom TC stores out there?
25 August 2003, 00:51
LoneEagle
www.eabco.com
www.sskindustries.com
http://www.mygunroom.com/dvgunshop/calibers.htm
http://www.mbmco.net/Merchant2/merchant.mv?Screen=SFNT&Store_Code=OTT
25 August 2003, 03:59
KTS1
http://www.mbmco.net/Merchant2/merchant.mv?Screen=SFNT&Store_Code=OTT

Give Mike a call at OTT you won't be disappointed.

Wes
30 August 2003, 08:07
Chuck White
Try the Thompson Center Custom Shop!
Fox Ridge Outfitters!
www.foxridgeoutfitters.com

Hope this helps you out! Chuck
31 August 2003, 13:21
LoneEagle
Chuck, I have 2 Fox Ridge barrels and won't buy another from them. The reason? Poor chambering and sloppy tolerances. Examples? Sure my .250 Savage barrel I can load a 100 gr Ballistic Tip about .070" longer than SAAMI standard forget accuracy with factory loads. Another? OK. My .350 Rem Mag barrel I load to an overall length with the 225 gr Ballistic Tip to 3.160" not bad for 2.8" cartridge right? And that bullet ain't even on speaking terms with the lands. I settled on that length because it gave me .350 of bullet including boat tail in the case neck.
That's why I didn't put Fox Ridge on my list. Obviously there isn't anything custom about their barrels but the extra chamberings. Sean
31 August 2003, 17:54
klw
http://www.reedercustomguns.com/