Another No. 1 in .450-400

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9421043/m/2081044951

23 July 2011, 04:09

Bill/Oregon

Another No. 1 in .450-400

Had one of these a year or two back and sold it to fund another crazy scheme. Missed it, so found another. The seller said it was "sealed in the box in the warehouse" and would not give me a stock preview, so I had to cross my fingers. Well, let's just say someone at the Ruger factory decided that a bit of figure was appropriate for such a classic caliber. Hope to shoot her in the new couple of days. By the way, I mounted my go-to scope for big bores, an old steel El Paso Weaver K 2.5, and added the requisite Limbsaver. She's just over 9 1/4 pounds -- about right I think.

23 July 2011, 04:53

mete

Want a stock preview ? VERY, VERY Nice !

Use it often and enjoy .

23 July 2011, 15:34

BwanaCole

Thats lovely! Enjoy it!!

H. Cole Stage III, FRGS
ISC(PJ), USN (Ret)

"You do not have a right to an opinion. An opinion should be the result of careful thought, not an excuse for it."

Harlan Ellison

" War is God's way to teach Americans geography." Ambrose Bierce

23 July 2011, 18:05

Mad Dog

Beautiful rifle. It just begs to go to Africa!

Mad Dog

23 July 2011, 18:46

Low Wall

Fantastic wood!
You hit the JACKPOT with that #1 Bill..

25 July 2011, 21:23

degoins

Nice!!

26 July 2011, 04:23

Bill/Oregon

Thanks Degoins. Still have your 5744 data!

26 July 2011, 20:57

degoins

You're most welcome. 5744 sure adds some versatility to that fine caliber.

31 August 2011, 06:41

Snowwolfe

Have a Boddington version in 450/400 due in Thursday. Purchased it from another forum member since I am rich in 450/400 components after stock piling them for a double I purchased that ended up being returned.

Just curious, the factory Hornady loads were rather anemic at approximately 1,975 fps. Can the Ruger #1 be safetly pushed to 2,100 or 2,150 fps?

As far as the Limbsaver, do they make one prefit for the Ruger #1?

31 August 2011, 08:45

Bill Brady

As to the lim saver they do make one profit for the #1 I've put one on four #1's

31 August 2011, 21:26

degoins

quote:
Can the Ruger #1 be safetly pushed to 2,100 or 2,150 fps?

Absolutely......and well beyond if you so desire.

03 September 2011, 13:04

209jones

The Limbsaver prefit I got for mine needed the mounting holes moved up to mount it properly. I'm a little jealous of that G2S stock, mine looks like yours, on one side only, other side is kind of BORING!! I'm in the hurry up and wait mode for an expander to use some cast boolits in it. Guess I will have to go blast off some 400 Hornadys this weekend, so I can have some more cases emptied out.

Krieghoff Classic 30R Blaser
Stevens 044-1/2 218 Bee
Ruger #1A 7-08
Rem 700 7-08
Tikka t3x lite 6.5 creedmo
Tikka TAC A1 6.5 creedmo
Win 1885 300H&H. 223Rem
Merkel K1 7 Rem mag
CCFR

08 September 2011, 01:55

Snowwolfe

Put the limbsaver on mine as well. Not a very good fit. Had to fill in and redrill the holes in the stock. Pad is slightly oversize for the Ruger.
It is functional, but on a scale of 1-10 would rate the pad fit about a 6.

08 September 2011, 20:19

Rockrat

Good looking rifle, and a nice piece of wood to boot. You did well!

09 September 2011, 18:13

Bill/Oregon

Rockrat: Thanks. So far I have only shot some loads with 5744 and the Hornady .411 300-grain bullet -- very pleasant of course. But I have some 400-grain CEB solids loaded at full bore, and will report on their performance when I can get to the range.