.35-.348 Siamese Mauser

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/98610224

21 February 2002, 16:26

C.S. Justice

.35-.348 Siamese Mauser

I am thinking about building a .35-.348 on a Siamese Mauser action, but the only reamer I can find for rent is a.35-.348 AI. Will the AI cartridge feed properly without a lot of work, or should I have a reamer made? Thanks CSJ

21 February 2002, 18:02

D Humbarger

Try finding a 348 reamer with a floating pilot. Replace the 348 pilot with a 35 caliber pilot. Cut the chamber then go back in with a 35 caliber neck & throat reamer.

P. S. Welcome to the best Gun forum on the internet.

------------------
NRA Life member

[This message has been edited by Bear Claw (edited 02-21-2002).]

22 February 2002, 05:49

<Pfeifer>

If you are interested in some new "W-W SUPER" 348 Win brass for this project give me a holler. Jeff P

23 February 2002, 17:02

C.S. Justice

Bear Claw, thanks for the information and the welcome. CSJ