can someone please tell me how to remove the lever from a winchester 94 thanking you in advanc e Tanoose

Tanoose,

You don't know what you are asking. Experienced gunsmiths don't like taking 94's apart. There are books available on the subject if you want to try it.

1. use a screwdriver with a wide thin blade.
to remove the lever pin cover screw, located on the left side of the receiver at the upper front.
2. use a drift punch to push out the lever pin toward the left. This is accessible through a small hole on the right side of the receiver, just above the loading gate.
3. remove the cross-screw that pivots the link plate at the lower left front of the receiver.
4. move the lever downward, alone with the attached link, then move them foward, disengaging the rear of the link from the locking block. the lever and link assembly are then removed downward.
hivelosity

I took a M-94 apart once, completely stripped it. When I got it back together I had about 4 parts left.

I brought it in to my Gunny and proclaimed. "I totally screwed up I took this rifle apart and cant put it back together".

So many customer's had brought in leverguns with the same problem, and had always given him such BS exuses, that he fixed it for me for free just for being honest.

I guess the morale is that "Gunny's have heard it all".......10