The Accurate Reloading Forums
Yugo with a 284 case

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/9561003832

17 January 2018, 08:02
MileHighShooter
Yugo with a 284 case
Is there much trouble getting a M48 to feed 284 based cartridges?


If you think every possible niche has been filled already, thank a wildcatter!
17 January 2018, 16:54
Jim Kobe
I did mine on an '09 action, very little mod to the rails.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

17 January 2018, 20:23
dpcd
They work well until you get into the 33 and up range of bullet diameter and then you just have to open the rails out a little up front.
Because they were made for 32 diameter bullets, as everyone knows.
17 January 2018, 22:19
larrys
My 98 had to have the feed rails opened a little at the front. Jim did the final work for me and it is flawless.


Larry

"Peace is that brief glorious moment in history, when everybody stands around reloading" -- Thomas Jefferson
17 January 2018, 23:14
MileHighShooter
quote:
Originally posted by dpcd:
They work well until you get into the 33 and up range of bullet diameter and then you just have to open the rails out a little up front.
Because they were made for 32 diameter bullets, as everyone knows.


Looking at 6mm or original 7mm.


If you think every possible niche has been filled already, thank a wildcatter!
18 January 2018, 03:51
Bobster
I did a M24 Yugo in 7x57 and it feeds superb with no mods.