15 February 2015, 10:00
twilliBenelli safety
Directions on how to change safety from right handed to left handed on a Benelli legacy ?
15 February 2015, 11:10
meteI couldn't find it in the instructions but it should be self explainatory and easy to do.
15 February 2015, 17:23
farbedoRemove the trigger assembly.
The safety is held in by a spring loaded detent. Above the safety you will see a roll pin. That holds the spring and detent. Press out the roll pin, and keep your thumb over the hole above it. The spring will fly out of there if you do not trap it. Turn the trigger assembly upside down to release the detent. The safety will now push out. Put it back in the opposite side and reassemble.
Go to Brownells website if you need to see a schematic of how it goes together. It is pretty easy to do.
Jeremy
18 February 2015, 03:14
twilliThanks will give it a whirl.