The Accurate Reloading Forums
Ruger 1V Scope Base

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/7741049422

20 September 2016, 00:41
troutcreeks
Ruger 1V Scope Base
I couldn't get the scope back far enough for a 20x varmint scope, even with extended rings. Lacking the ability to do a radius on a taper I milled down the tops of the existing Ruger blocks and soldered a flat bar which I then milled for Talley rings. It works but I think its looks could be improved. Does anybody make anything like this? Or have thoughts on how to improve it? Thanks [IMG:left] [/IMG]
20 September 2016, 00:49
dpcd
Yes, Ruger makes the quarter ribs; one for the 1H .458 is close to the varmint barrel and could be modified to fit.
20 September 2016, 01:22
ramrod340
https://www.midwayusa.com/prod...ase-ruger-no-1-matte

Something like this work?


As usual just my $.02
Paul K
20 September 2016, 02:43
speerchucker30x378
EGW makes a replacement, one piece scope base. Rip off the old POS and bolt it on.

http://www.egwguns.com/hd-scop...catinny-scope-mount/


When I was a kid. I had the stick. I had the rock. And I had the mud puddle. I am as adept with them today, as I was back then. Lets see today's kids say that about their IPods, IPads and XBoxes in 45 years!
Rod Henrickson
20 September 2016, 02:47
speerchucker30x378
OOPS ! You have the Varmint contour. Not sure about that. The EABCO base will probably work for that. It's a bit ugly too.

http://www.eabco.com/Ruger01.html#


When I was a kid. I had the stick. I had the rock. And I had the mud puddle. I am as adept with them today, as I was back then. Lets see today's kids say that about their IPods, IPads and XBoxes in 45 years!
Rod Henrickson