1903 Greek Mannlicher guard screws

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/7661013412

29 September 2015, 04:35

dfcjr

1903 Greek Mannlicher guard screws

Can someone please tell me the screw size of the guard screw and the front screw of the rifle. Thank you.

29 September 2015, 06:27

dpcd

Front; 1.280 long
.393 head OD
.126 thick head
.254 thread OD;
28 TPI and .9mm also.

Rear; 1.728 long
Head is .176 thick
Otherwise like front.

29 September 2015, 17:01

dfcjr

dpcd
Thank you for your very helpful response.
dave

29 September 2015, 20:18

dpcd

You are very welcome. I get about an equal number of "thank yous" as I do, "you are now on my banned list".

30 September 2015, 13:14

Nakihunter

http://www.mannlicher.org/

Some very knowledgeable people on this site. Been around for a while. The forum used to be good but was not maintained well and fell apart. I think the main guy was Tom but his email is no longer on the website.

I suspect the originals were all metric measurements.

"When the wind stops....start rowing. When the wind starts, get the sail up quick."