The Accurate Reloading Forums
Got a HVA 640 for any upcoming projekt!

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/722108012

18 February 2005, 13:32
Stefan
Got a HVA 640 for any upcoming projekt!
I found this Husqvarna 640 M-98 rifle on my local gunshop the other day. Really great condition and the reciver isn´t even drilled and tapped.

The action is a Blegian FN without thumbcut etc.

I´ll save it for a day when i have decided what to do with it Wink

The rifle set me back about 100$ US Cool





Stefan


_____________________________________________

The bitter taste of poor quality stays in the mouth far longer than the sweet taste of the low price!
18 February 2005, 18:12
mho
What a gem! What caliber - 6.5x55 by any chance?? You should shoot it as it is now, just for the heck of it...
- mike


*********************
The rifle is a noble weapon... It entices its bearer into primeval forests, into mountains and deserts untenanted by man. - Horace Kephart
18 February 2005, 18:13
Jim Kobe
Stefan,

Any progress on the trigger?

Jim


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Former Professional member American Custom Gunmakers Guild

18 February 2005, 19:29
Stefan
mho.

It´s a 30-06 an It´s allready ripped apart Wink The barrel was allmost loose in the action Eeker

I have struggeled with a few ones that have been badly frozen in but this was really the opposite! I just tested if the setup in the barrelvise seemed stabile by jerking the key around the action lightly with one hand and that was all it needed to brake the barrel lose from the action.......



Yes Jim I sent you a PM about that!

My friend found the trigger but thr trigger shoe was broken off. Still intersded?

Stefan


_____________________________________________

The bitter taste of poor quality stays in the mouth far longer than the sweet taste of the low price!
18 February 2005, 20:04
Jim Kobe
Absolutely am interested, Send me an email, I can't find my PM's

Jim


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Former Professional member American Custom Gunmakers Guild