The Accurate Reloading Forums
Broken extractor on old Sako 222

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/705105709

11 August 2008, 06:49
SShooterZ
Broken extractor on old Sako 222
Hey everyone...

Two questions: Where can I get a new extractor for an older Sako (Riihimaki) and who could I use to have it replaced?

(Hopefully same gunsmith?)

Thx!


*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#
I'll never be able to give back to this forum all that I've learned from it. But I do want to thank those of you that have helped me out over the years.
11 August 2008, 18:02
skb
I have found that Jim Lutz usually can get what you need regarding Sako parts, though it can take some time as he has the sent in from Finland. Most smiths could do the job. I can do it if your regular smith can not.
Steve
12 August 2008, 02:04
SShooterZ
Here are some pics of the bolt:








*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#
I'll never be able to give back to this forum all that I've learned from it. But I do want to thank those of you that have helped me out over the years.
12 August 2008, 02:34
SShooterZ
quote:
Originally posted by skb:
I have found that Jim Lutz usually can get what you need regarding Sako parts, though it can take some time as he has the sent in from Finland. Most smiths could do the job. I can do it if your regular smith can not.
Steve


Thanks Steve. Do you know how I could get a hold of Mr. Lutz?


*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#
I'll never be able to give back to this forum all that I've learned from it. But I do want to thank those of you that have helped me out over the years.
13 August 2008, 00:17
308Sako
I think he means Jim Lutes of or was from Whitewater Kansas. send an IM to "Harry" he should know.






Member NRA, SCI- Life #358 28+ years now!
DRSS, double owner-shooter since 1983, O/U .30-06 Browning Continental set.