The Accurate Reloading Forums
can anyone transcribe the Hansen action site

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/686103777

12 December 2007, 20:23
22WRF
can anyone transcribe the Hansen action site
That little 702 action looks like it would make a great action for a .250 Savage.

http://www.magnumhansen.com/laaskasser.htm
12 December 2007, 20:31
mete
Why ? Do you want a 577 Tyrannosaur ?? Big Grin
12 December 2007, 20:51
TC1
This is a very neat tool. It should translate the whole page for you

Babble Fish

Terry


--------------------------------------------

Well, other than that Mrs. Lincoln, how was the play?
12 December 2007, 21:02
TC1
My bad, I couldn't find anything on my link that would do it. What is that anyway, Norwegian?

Terry


--------------------------------------------

Well, other than that Mrs. Lincoln, how was the play?
12 December 2007, 23:49
manhasset
Looks like the Ed Brown action
12 December 2007, 23:52
eskimo1
You can get any custom action you want for probably less money then they asking for it!

The cheapest is 10200 NOK = $1675 Eeker

You can most likely build an entire rifle for that money based on a Remmy 700.
13 December 2007, 01:11
22WRF
quote:
Originally posted by eskimo1:
You can get any custom action you want for probably less money then they asking for it!

The cheapest is 10200 NOK = $1675 Eeker

You can most likely build an entire rifle for that money based on a Remmy 700.


A Remmy! Frowner I just turned 55 a few days ago and I have never owned a Remmy in my life, thank God. Why would I want to own one now?
13 December 2007, 02:05
mete
Babelfish and other translations often give some bizarre results ! There are enough Norwegians here to translate though it would be nice if you were specific .MrRigby for one and there is a Norwegian gunsmith here too.
13 December 2007, 03:02
Cardinal
The actions use the familiar footprint of Rem700 actions, but are tuned and straighten out. Similar to a Stiller og Surgeon I guess.

The 702 is suitable for the 308 family and is also used for smaller like 223. The 702 is available i a few configurations, SB has a smaller ejection port but one is still able to load it from above with a staggered magazine. The RT has maximum stiffness but kan only be used with a box mag of as a singleshot.

All have a 3 point M70-type safety. Sako type extractor


703 has the same OAL as the 702 but accepts longer mags and bolt movement. Suitable for cartridges like 6,5x55, 7x57 etc. Also accepts WSM with a special triggerguard system...

704 is for long-action like 30-06, 300WinMag and 375 H&H.

706RT is made specially for 338 Lapua sniperrifles.