The Accurate Reloading Forums
So When You Do Not Want To Unscrew The Barrel

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/6641069672

16 January 2024, 03:32
WoodHunter
So When You Do Not Want To Unscrew The Barrel




16 January 2024, 04:24
larry miller
Man. What a contraption.
16 January 2024, 18:36
Jim Kobe
What is it you are trying to accomplish, or avoid?


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

16 January 2024, 18:58
Bobster
Looks like he may be polishing a muzzle brake joint.
16 January 2024, 19:46
Macs B
How much you want to bet that its a pinned and tacked suppressor that would make the rifle a SBR if it is removed.


Macs B
U.S. Army Retired
Alles gut!
17 January 2024, 22:03
WoodHunter
Nope, fitting a NECG front barrel band ramp prior to silver soldering.

M70, 416 Rem Mag, cut rifled barrel.
17 January 2024, 22:15
Bitterroot
You size the band not the barrel Roll Eyes


Bitterroot
www.americanhuntingrifles.com
18 January 2024, 23:39
WoodHunter
quote:
Originally posted by Bitterroot:
You size the band not the barrel Roll Eyes


You might but I do not. My method ensures the barrel band is concentric to the barrel bore centerline, as I dial in to the bore.

I have sized the bands before, what a PITA.



458 Lott, full house 500 grains, 3 shot group, 100 yards. Would have been a one holer but I was starting to flinch.

Note the dial indicator in the first photo. The steady is roller bearing and operates like a 4-jaw chuck.
19 January 2024, 00:41
Duane Wiebe (CG&R)
Methinks Woodhunter has too much time on his hands..HAR!
19 January 2024, 18:31
Jim Kobe
So, l;how did you align the bore with the OD? Is the bore concentric to the OD? The barrel is probably tapered, are Your grinding the taper off and what does it do to align the bore of the sight, which is straight bored, to the match the rifle's bore????


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

19 January 2024, 19:22
Bitterroot
quote:
Originally posted by Jim Kobe:
are Your grinding the taper off ??


That's what I was wondering. What about the the area where the ramp is? Is that part of the barrel still tapered?

It takes me 5 minutes, 10 max to fit a band to the tapered barrel. And silver solder???? Soft solder is more than adequate.


Bitterroot
www.americanhuntingrifles.com
19 January 2024, 20:31
Duane Wiebe (CG&R)
My thoughts about using silver solder are like Bitteroots...Which brings up a point that may be a little off the subnject matter.

I seldom use silver solder on a barrel (mostly like never) That's some outrageous heat..any wisdom on that?
19 January 2024, 23:39
jpl
When I do muzzle work, I stick the barrel through the head. A 4-jaw on one end and a spider at the back lets me center things up.
20 January 2024, 03:41
Duane Wiebe (CG&R)
quote:
Originally posted by jpl:
When I do muzzle work, I stick the barrel through the head. A 4-jaw on one end and a spider at the back lets me center things up.



For something simple like crowning? Piloted crowning tools make all that obsolete
26 January 2024, 18:59
jpl
Most of my muzzles are threaded.

I wonder how WoodHunter's setup would work for cutting threads. It seems like there might be enough torsional spring to cause problems.