Hi, does anyone know what the barrel shank and thread dimensions are for the M-95 Styer?
Thanks.

I got a reply on a different forum.
1.020 dia X .693 long 14 t.p.i. v type thread.

I have been compileing a list of different guns, so it might be easier to see if a take off barrel might work for a project. I'll post it below.

Rifle action dimensions

Action threads length Reciver OD? other
Mauser lrg. Ring 1.1x12 1.41â€

Mauser sm. Ring .98x12

CZ 550 1.1x12.7

BBK-02 1.1x12

Rem 700 1 1/16â€x16 .885
1.0625x16
Win 70 1x16

Ruger 77 1x16 1.41â€

Sako

Weatherby mk V 1.06x16 .7
1 1/16x16
Browning A-bolt

Ruger no. 1 1x16â€

Rem Rolling block
No. 1 smokeless 1.055x12 square 1.43â€

Win 1885 High wall

Sharps 1874

Savage 110 < 2001 1.05x20
Short magnum>2001 1.125x20 G series, noticeable step after threads
CRF 1 1/16x20
1.0625x20
Bolt Shotgun 1.1x20?

MRC 1999 1x16 UNF 2B .75

Enfield M-17 x10 square

Enfield SMLE

Mosin Nagant .97â€x16 or 1x16â€

Steyr M-95 1.020x14 tpi V .693†shank

Win 94 .809x20
Win 94 BB .875x28?

Rossi 92

Marlin 336 .775x12 square .85â€

Marlin 1895 45-70 same as 336, 450 may have been changed to a v thread.

Savage 99

Norinco Win 1887 lever shotgun 12 ga. 1.1x26 proofed to 43ksi!

Norinco Win 1897 pump shotgun 12 ga. Proofed to 43ksi

"Gunsmithing" by Roy F. Dunlap has 20-25 barrel shank drawings with dimensions scattered throughout the book.

A lot of good reading, too.

Just a thought.

Rojelio

Thanks, I'll look it up.