The Accurate Reloading Forums
Need No-Go Rim Thickness for 45-70 No-Go gage

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/6431037101

26 January 2009, 22:59
Bob Nisbet
Need No-Go Rim Thickness for 45-70 No-Go gage
Does someone have a 45-70 Rifle Clymer (or other brand) No-Go gage that can take a measurement and tell me the rim thickness.


Bob Nisbet
DRSS & 348 Lever Winchester Lover
Temporarily Displaced Texan
If there's no food on your plate when dinner is done, you didn't get enough to eat.
27 January 2009, 01:37
Bob Nisbet
See the 348 Case Info thread, last entry which states:

Info Received:
The case rim nominal thickness is 0.070.
SAAMI listed maximum head space is 0.077.
By analysis, any head space exceeding listed max is excessive.
Also by analysis a No-Go gage would be 0.0772 +0-.0001


Bob Nisbet
DRSS & 348 Lever Winchester Lover
Temporarily Displaced Texan
If there's no food on your plate when dinner is done, you didn't get enough to eat.
27 January 2009, 05:59
SR4759
Measure your brass and make it fit the brass.