The Accurate Reloading Forums
M-70 - Removing the Extractor

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/6371049841

28 January 2011, 20:09
Boxhead
M-70 - Removing the Extractor
A bit of steer needed on how to remove the extractor on my post-64 CRF M-70 Safari Express. Thanks in advance.
28 January 2011, 22:27
Westpac
Looking from the rear of the bolt, rotate the extractor to the right and out of it's groove parking it midway between both lugs. Push the extractor forward and off.


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
28 January 2011, 22:42
Fjold
With much coaching and numerous pictures even I was able to do it when I installed a Williams stainless extractor in my LH M70.

It was one of the most terrifying 3 hours of my life.


Frank



"I don't know what there is about buffalo that frightens me so.....He looks like he hates you personally. He looks like you owe him money."
- Robert Ruark, Horn of the Hunter, 1953

NRA Life, SAF Life, CRPA Life, DRSS lite