The Accurate Reloading Forums
Remington trigger question...

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/601108856

16 April 2007, 02:01
hangunnr
Remington trigger question...
I'm not sure how to word this so I'll just throw it out there.

Are there any differences in the geometry of the 700 series trigger and the 600 series? I know the mounting holes are the same but are the actual triggers in the same place?

The reason I ask is that I picked up a new Brown Precision stock for a mid grip XP100 to convert it to a rear grip. I'm finding that using a 700 series trigger puts the bow of the trigger too far to the rear for clearance in the trigger guard.

hangunnr


______________________

Proudly living in the USA where even Bill Klinton has more moral fiber than PPPoacher.
16 April 2007, 03:32
Westpac
Yes, the M600 trigger lever sits about .900 inch further forward than the M700.

The last listed trigger should do you: http://www.brownells.com/aspx/NS/store/productdetail.aspx?p=17044&s=49070


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
16 April 2007, 03:45
hangunnr
.900" is one hell of a difference. Or did you mean .090"? bewildered

That answers as to why the M700 trigger isn't working.

Thanks!!

hangunnr


______________________

Proudly living in the USA where even Bill Klinton has more moral fiber than PPPoacher.
16 April 2007, 03:57
Westpac
quote:
Originally posted by hangunnr:
.900" is one hell of a difference. Or did you mean .090"? bewildered

That answers as to why the M700 trigger isn't working.

Thanks!!



hangunnr



I meant .900... Maybe even closer to 1 inch!


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
16 April 2007, 06:45
hangunnr
That's one hell of alot of difference.

Thankyou!

Brownells shows out of stock for that trigger. I'll give Timney a call in the morning to see if'n they can help.

hangunnr


______________________

Proudly living in the USA where even Bill Klinton has more moral fiber than PPPoacher.
16 April 2007, 07:27
olcrip
quote:
Originally posted by hangunnr:
I'm not sure how to word this so I'll just throw it out there.

Are there any differences in the geometry of the 700 series trigger and the 600 series? I know the mounting holes are the same but are the actual triggers in the same place?



The reason I ask is that I picked up a new Brown Precision stock for a mid grip XP100 to convert it to a rear grip. I'm finding that using a 700 series trigger puts the bow of the trigger too far to the rear for clearance in the trigger guard.

hangunnr



I used a model 7 trigger and stock for my XP100 rebarreled action conversion


Olcrip,
Nuclear Grade UBC Ret.
NRA Life Member, December 2009

Politicians should wear Nascar Driver's jump suites so we can tell who their corporate sponsers are!