The Accurate Reloading Forums
How big can you go on a Ruger #1

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/59910984

14 May 2003, 19:18
Texican
How big can you go on a Ruger #1
Just playing around with a few ideas of what to do with a #1. How long of a cartrdge can be fitted into this action? Thinking of something like an 8x88 or 9x99. Not really experienced in these matters just like to play around with ideas and maybe someday actually have something built. Thanks in advance
14 May 2003, 20:49
Grandpasez
Tex-We are going to chamber some for my 458 HE,
that the case measures 3.45 inches long/loaded length will be up to 4.3 incheslong.So the cartridges you envision will be OK.Ed.
15 May 2003, 09:21
Bad Ass Wallace
Tex,
I got a No#1 in 45/120.3.25" and another in 500 Nitro x 3.0". No problems except the nitro needed a bit off the top of the breach block to clear the rim during feeding.
15 May 2003, 03:13
Texican
Appreciate the quick replies.
15 May 2003, 04:23
Dago Red
I believe that theoretically there is no limit on case Length. The cartridge chambers directly into the barrel, the block comes up behind the cartridge holding it in place.

Red
15 May 2003, 13:31
DigitalDan
Dago has it right, and the largest bore I've heard of is the .585 Nyati...OUCH!
15 May 2003, 13:59
<JBelk>
It's NOT a straight line into the chamber, but the action can be altered to take some LONG cartridges.

Fat is bad. The barrel shank is only one inch in diameter.

Failure would be as rare as Dan Rather behind a gunshow table, but both would make me nervous.

The worst I've EVER been kicked was Ross Seyfried's, Rebored to 470 Nitro, #3 Ruger with the factory stock. THAT sumbitch installed a flinch that lasted five thousand rounds!!
15 May 2003, 14:16
<Lightnin>
I had a guy at my range two weeks ago with a #3 chambered for 600 JDJ. You talk about a flinch!
Jim
15 May 2003, 14:33
Grandpasez
Jack--Ross never did like to add much weight.
Still have picture of him getting kicked so hard,
his shooting glasses came off.The ones they are putting my 458 HE in will be 13 lbs.All I had to do is show the guys who will shoot it,is Ross's
recoiling photo from G&A..How far are you from
Ross over those couple big hills..Ed.

[ 05-15-2003, 05:34: Message edited by: hubel458 ]
15 May 2003, 14:41
<Lightnin>
Ed,
Where is Brinton, MI? I'm from Michigan and I know where Brighton is but I'll be darned if I have a clue where Brinton is. Jim
15 May 2003, 16:24
Grandpasez
Jim-- Brinton is a little 4 corners out NW of
Mt. Pleasant.Between little towns of Weidman,
Barryton, and Lake Station.Farm and woods country,
blessed with deer and turkey galore.Ed.