M70 Magazine Follower

08 April 2006, 05:25

GaryVA

quote:
Originally posted by Jaywalker:
Who makes a steel (preferably stainless) M70 magazine follower for 30-06?

Jaywalker

Just curious, why is the factory M70 follower disliked.

I have a M70 Supergrade 30-06 w/ this follower and it feeds and functions as well as anything I've ever seen. By accident, I discovered it corrected a last round feed problem in a CZ 375H&H of mine. I've since put it in 5 other CZs w/ feed issues and it corrected all of them.

Maybe it is a fluke w/ mine, but I think it is a well made reliable follower.

08 April 2006, 05:38

Fjold

Jim Wisner makes alot of M70 parts but their website is down so I don't know how to get in touch with them.

Frank

"I don't know what there is about buffalo that frightens me so.....He looks like he hates you personally. He looks like you owe him money."
- Robert Ruark, Horn of the Hunter, 1953

NRA Life, SAF Life, CRPA Life, DRSS lite

08 April 2006, 06:35

Jaywalker

GaryVA, So far, I don't dislike the installed follower, but as it's made of carbon, it will be difficult to modify for feeding improvement, should that be necessary. I understand followers should be optimized for the cartridge, not "one size fits all."

Fjold, I'll watch for Wisner's site, thanks.

Jaywalker

08 April 2006, 10:04

J Wisner

Fjold.

The website is not down, you had a OLD LINK that is no longer there. You need to update your favorites.

www.wisnersinc.com

We make folllowers for the pre 1964 Winchester M70 actions.

Jim Wisner
Custom Metalsmith

08 April 2006, 19:44

GaryVA

quote:
Originally posted by Jaywalker:
GaryVA, So far, I don't dislike the installed follower, but as it's made of carbon, it will be difficult to modify for feeding improvement, should that be necessary. I understand followers should be optimized for the cartridge, not "one size fits all."

Fjold, I'll watch for Wisner's site, thanks.

Jaywalker

Jaywalker,

The follower I speak of is an alloy steel unit like the older MIM extractors were. It is a poor choice for a spring extractor but I don't see it as a problem w/ the follower. Unless something has changed, this was the follower used on every Supergrade and Safari Express I've seen over the last numerous years.

For your rifle, any one from a 30-06, 270 and 25-06 should be the same and should work as perfect as anything. There should be plenty available even w/ the plant closing.

Good Luck

08 April 2006, 21:15

Jaywalker

Gary, all I've seen lately - SN 3 million+ have had carbon followers, not steel or alloy. (I have two of them, both stainless.) They're nice looking, but I'm concerned they're optimized for WSMs.

Jim, I presume the pre-64 followers will work in a new Classic?

Jaywalker

08 April 2006, 21:26

ACRecurve

www.brownells.com

They may have some left. I bought 2 to replace the plastic ones in a couple of CZ's.

Good hunting,

Andy

-----------------------------
Thomas Jefferson: “To compel a man to furnish funds for the propagation of ideas he disbelieves and abhors is sinful and tyrannical.”

09 April 2006, 03:41

GaryVA

quote:
Originally posted by Jaywalker:
Gary, all I've seen lately - SN 3 million+ have had carbon followers, not steel or alloy.
Jaywalker

My newest w/ the alloy follower is SN G3014094 and the oldest is about 3 or 4 years older. Everyone between has it as well.

09 April 2006, 03:46

Fjold

quote:
Originally posted by J Wisner:
Fjold.

The website is not down, you had a OLD LINK that is no longer there. You need to update your favorites.

www.wisnersinc.com

We make folllowers for the pre 1964 Winchester M70 actions.

Jim Wisner
Custom Metalsmith

Well Jim at least I remembered that you made them, even if I couldn't find you.