The Accurate Reloading Forums
FN supreme action Husqvarna 9.3x62 questions

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/5681024591

26 December 2013, 09:31
ColoradoMatt
FN supreme action Husqvarna 9.3x62 questions
Three questions about these:

1) How well do they feed?
2) Are the feed rails and/or underside of the action machined any differently from the Husqvarna 8x57 or 06's to help the 9.3x62 feed?
3) Are the mag box dimensions any different than the Husqvarna 8x57 or 06' box dimensions?
4) If the answer to question #1 is "Very good" regardless of the answer to question #'s 2&3, would the feed rails, underside action taper, and box dimensions of these rifle be a good guide in building 9.3x62 rifles with most other "standard" size mauser actions set up for 57mm rounds? Thanks,
Matt


Matt
FISH!!

Heed the words of Winston Smith in Orwell's 1984:

"Every record has been destroyed or falsified, every book rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered. And the process is continuing day by day and minute by minute. History has stopped. Nothing exists except an endless present in which the Party is always right."
27 December 2013, 00:11
D Humbarger
I built my 9.3 on an FN Supreme/FN400 action. Didn't need to do anything to the action. Feeds fine.



Doug Humbarger
NRA Life member
Tonkin Gulf Yacht Club 72'73.
Yankee Station

Try to look unimportant. Your enemy might be low on ammo.
27 December 2013, 03:07
ColoradoMatt
Thanks!


Matt
FISH!!

Heed the words of Winston Smith in Orwell's 1984:

"Every record has been destroyed or falsified, every book rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered. And the process is continuing day by day and minute by minute. History has stopped. Nothing exists except an endless present in which the Party is always right."