01 February 2009, 05:32
tuffteddybmodel question
ok people i might be in the wrong spot.
i have a old mossberg,model 800A,i was going to get a trigger and a new barrel put on it.
but is the action any good?or am i better off to just buy a new rifle?
thanxs folks.
01 February 2009, 05:46
vapodogthe economical thing to do is to trade it for a new whizbangor other....you can spend more installing a new barrel than trading for a Rem 700 etc.
01 February 2009, 06:52
tin canNot many were made, they were not particularly good rifles as I understand it. If you like yours that's all moot and I've never owned one to make an actual comparison.
I'd hang onto it and buy another rifle- you never know, it might be collectible one day.
The way the economy is going, this might be a good time to peruse the used gun racks, or a new Remington, Savage, or Marlin bolt action might be of interest.
01 February 2009, 07:06
wympleI have the 8oo in 22-250. The letter denotes the caliber. It's my favorite rifle and the only one that will go to the grave with me. The actions are very strong. Go to "US bolt action sporting rifles" and scroll untill you find yours. It tells you about it. I had mine fluted, jewelled and am looking at a custom stock.
01 February 2009, 07:57
tin canquote:
"US bolt action sporting rifles"
gotta URL?
01 February 2009, 09:44
wympleNo, I just have the pertaining page in my favorites. Here is the description part. I will try to post the charts, as well.
Mossberg 800
Notes: This rifle was originally designed by Louis Seecamp and Carl Benson in the late 1960s for Montgomery Ward to sell in their stores. Montgomery Ward decided not to sell them, but Mossberg took up the type and sold it in its various incarnations into late 1970s.
The Model 800 had a strangely-shaped S-shaped bolt handle – bent forward, then back. The rifle is well-made and looks good. Internally, the bolt is also unusual, having two rows of three lugs (most rifles only have one set of lugs). The extractor uses a rather short blade, but its spring is especially strong, saving space and giving the Model 800 reliable case ejection. The early versions used a walnut Monte Carlo-type half stock, with the pistol grip wrist having a plastic white cap and the buttplate having decorative white spacers. The pistol grip wrist and fore-end had impressed skip-line checkering. The pistol grip wrist also had a decorative deer’s head on each side, and the fore-end had a decorative running buck on each side. The barrel was 22 inches long, with a folding leaf rear sight and a ramp front sight. The original Model 800 was built from 1966-78; original chamberings .243 Winchester and 7.62mm NATO, but more chamberings were quickly added due to customer demand. Starting in 1967, the nomenclature was changed greatly; the 7.72mm NATO version became the Model 800A, the .243 Winchester version became the Model 800B, the .22-250 version was the Model 800C, the short-lived (1968-69) .350 Remington Magnum version became the Model 800D, the also short-lived 6.5mm Remington Magnum version became the Model 800E, and the even rarer .222 Remington version (built only for a few months in 1970) became the Model 800F.
There were many variants, most of which were simple variations of stock shape or "deluxe" versions, but several need separate explanations. The Model 800AM was a shorter version of the Model 800A, with a 20-inch barrel, a straight spatulate bolt handle, and a full-length Mannlicher-type stock. It’s a rather rare variant, despite being manufactured for almost 3 years. The Model 800AVT was designed for varmint and target shooting; it has a 24-inch heavy barrel and came with bases for scope rings.
The Model 800BM is the same as the Model AM above, but with a different chambering. The Model 800BVT is also the same as the Model 800 AVT, but again with different chambering. The same is true of the Model 800C and Model 800CVT.
The Model 800V (later re-designated the Model 800VT) used an extra-heavy 24-inch barrel and came with bases for scope rings; it is similar to the Model 800AVT, BVT, and CVT, but with an even heavier, stiffer barrel made of better-quality steel.
01 February 2009, 09:51
wympleAside from the plain low budget stock, I love this rifle.