The Accurate Reloading Forums
Männlicher Schöenauer Stock Discolration

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/5151041322

22 July 2016, 18:40
Lawdog
Männlicher Schöenauer Stock Discolration
I recently acquired a 1961 MCA. A previous owner installed a slip on rubber recoil pad. The area covered by the pad has darkened. I believe it is the finish only. It looks like the result of a reaction of the rubber and the finish. I'm afraid the stock will need refinishing, unless anyone has an idea of how to reduce the discoloration. I'm in Houston if anyone can suggest a smith that might undertake refinishing or stripping the old finish for me. In the alternative are there any suggestions as to a stripper. Other than this issue the stock is in great condition and bluing is near perfect.
Thanks in advance for any input.


"Suppose you were an idiot and suppose you were a member of Congress. But I repeat myself."
Mark Twain
22 July 2016, 20:46
ramrod340
Sorry to hear. Also sorry no name in Houston anymore.

I've had just the opposite. The area under the cover stayed lighter as the stock aged.

Hope it is just the finish. Good luck.


As usual just my $.02
Paul K
22 July 2016, 20:48
dpcd
Get a quart of lacquer thinner and steel wool it That will remove all the finish. Then start over with stain and finish. IE, you are going to have to strip it all down and refinish. It is not hard to do.
23 July 2016, 00:37
Lawdog
Thanks.


"Suppose you were an idiot and suppose you were a member of Congress. But I repeat myself."
Mark Twain
23 July 2016, 00:38
Lawdog
Thanks for the tip. I didn't want to use an industrial strength stripper.


"Suppose you were an idiot and suppose you were a member of Congress. But I repeat myself."
Mark Twain
23 July 2016, 01:57
dpcd
Formbys makes a refinishing kit that is basically what I said. I don't use real paint remover on stocks either. No need. Unless you are trying to remove the finish from a Remington or Browning; it is damn near impervious to anything.
23 July 2016, 05:16
Bobster
Naptha and a terrycloth rag worked for me on a similar problem.
23 July 2016, 05:45
dpcd
Right, I think Naphtha and Lacquer thinner is the same thing. Or close anyway.
23 July 2016, 06:01
ramrod340
quote:
I think Naphtha and Lacquer thinner

Naphtha is Mineral Spirts or for us old guys paint thinner.

Lacquer does have some high flash naphtha in it.

Solvents from five different families are used in lacquer thinners, including toluene, xylene and “high-flash” (meaning fast evaporating) naphtha from the petroleum-distillate family. The other four families are ketones, esters, glycol ethers and alcohols.

I feel Lacquer thinner is more aggressive


As usual just my $.02
Paul K
23 July 2016, 07:24
Lawdog
I believe you come up with the chemical makeup of the Houston ship channel from about 1960. At that time it would periodically ignite. Thankfully it's clearned up now.


"Suppose you were an idiot and suppose you were a member of Congress. But I repeat myself."
Mark Twain
23 July 2016, 07:54
ramrod340
rotflmo Now that's a fact.


As usual just my $.02
Paul K
23 July 2016, 08:12
Fjold
Naptha is also known as white gas or Coleman fuel.


Frank



"I don't know what there is about buffalo that frightens me so.....He looks like he hates you personally. He looks like you owe him money."
- Robert Ruark, Horn of the Hunter, 1953

NRA Life, SAF Life, CRPA Life, DRSS lite

23 July 2016, 19:30
dpcd
I am old enough to remember white gas.
23 July 2016, 19:36
Lawdog
Still have some.


"Suppose you were an idiot and suppose you were a member of Congress. But I repeat myself."
Mark Twain