Dop bottom/box Express Rifle Semi-Inlet Stock?

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/4771055631

18 July 2010, 23:29

Austin Hunter

Dop bottom/box Express Rifle Semi-Inlet Stock?

Do any of the semi-inlet stock providers offer a patter with a "drop" for the larger capacity bottom metals?

Example:

http://cgm-gunstockcheckering..../P1010027_edited.jpg

"Evil is powerless if the good are unafraid" -- Ronald Reagan

"Ignorance of The People gives strength to totalitarians."

Want to make just about anything work better? Keep the government as far away from it as possible, then step back and behold the wonderment and goodness.

19 July 2010, 00:26

kcstott

You can usually ask them to leave extra wood and it will only cost a small fee of like thirty bucks or so

www.KLStottlemyer.com

Deport the Homeless and Give the Illegals citizenship. AT LEAST THE ILLEGALS WILL WORK

19 July 2010, 04:55

Austin Hunter

Thanks - that was my plan if there wasn't an existing pattern.

I already have two Enfields with straight bottom metal; I have to decide it I want the extra cost of deeper bottom metal and whether it will provide one or two extra rounds.

19 July 2010, 05:02

kcstott

The other thing is I heard that pattern called many things but it looks like an American Classic with a pot belly or drop floor plate which ever you prefer to call it. A good stock maker/ duplicator should have no problem leaving wood behind so long as the blank allows it.

www.KLStottlemyer.com

Deport the Homeless and Give the Illegals citizenship. AT LEAST THE ILLEGALS WILL WORK

19 July 2010, 05:18

Duane Wiebe

You might want to check with Roger Vardy..I THINK he is developing a pattern for our pot belly bottom metal.

"Leaving extra wood" is hit and miss

19 July 2010, 06:57

Austin Hunter

Thanks! - I sent him a note.

19 July 2010, 19:00

jens poulsen

These guys got it right..

http://www.kilic-feintechnik.d...?tt_products[cat]=23