The Accurate Reloading Forums
6,5x55 to 6,5/284

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/452100901

22 December 2003, 04:46
garp
6,5x55 to 6,5/284
Do you guy�s think that a M 96, buildt 1910,6,5x55 will hold this cartridge.
22 December 2003, 05:10
Bill Leeper
As long as you load it to 6.5x55 levels it should hold it fine! Seriously, while it might be OK I wouldn't do it. Regards, Bill.
22 December 2003, 06:14
<JOHAN>
Well

There is a small problem, the case head diameter is larger on the 6,5X55 than on the 6,5-284 Norma. The bolt face will be a little larger. You will also encounter some trouble with the magazine since the 6,5-284 case has a larger diameter...

Stick with it in 6,5X55 or get annother rifle to rebuild.

/ JOHAN
22 December 2003, 09:34
358Mark
We rechambered one long ago, a Husky model 96. It has about 28" barrel. Don't shoot it much anymore but it worked fine. We loaded it to approximate 6.5/06 velocities. I understand that this is not recomended and folks like Bill have alot of expertise in this field. FWIW, I also have a 6/284 on the same action,also with no lug setback or other headspace problems.Your results may vary. Mark
22 December 2003, 12:16
vapodog
I wouldn't do it.
22 December 2003, 16:04
Major Caliber
I hate pre 98 actions.
23 December 2003, 18:20
killsoft
I wouldn't ruin an existing 6.5x55. Why not start with a Yugo M48 or 24/47 barreled action for about $80?

Better yet, if you want a hunting rifle, start with a commercial Mauser or CZ/Winchester/Kimber/Ruger in 260 or 6.5x55 and rechamber. You'll spend a fortune sporterizing a military Mauser unless you have the skills and tooling to do it yourself.