The Accurate Reloading Forums
New or aftermarket bolt for Brno ZKK 602

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/340102521

25 March 2004, 21:21
cr500
New or aftermarket bolt for Brno ZKK 602
Ive been looking around for a new bolt for a Brno ZKK 602 in 458. No bolts are available from Brno or CZ. Any ideas as to where I can get a new bolt or does anyone make aftermarket bolts????
26 March 2004, 01:17
jeffeosso
what happened to you old one?

if a cz550 can be fitted, try gunsmith@cz-usa.com

jeffe
26 March 2004, 13:47
cr500
The rifle is from a deceased estate. They found all the rifles but couldnt find the bolts. Will a CZ550 bolt fit. These are still available.
27 March 2004, 02:07
jeffeosso
you might try a test fitting (do not fire it) with one of your mates that has a 550.

jeffe
27 March 2004, 06:48
Mauser
If you have some cash to spend then call Fred Wells and have him machine a new bolt assembly. The bolt body alone (including the handle brazed in place) should be roungly at around $1000 and will cost more if he will have to fit the firing pin/bolt shroud assembly.

Quote:

Ive been looking around for a new bolt for a Brno ZKK 602 in 458. No bolts are available from Brno or CZ. Any ideas as to where I can get a new bolt or does anyone make aftermarket bolts????


27 March 2004, 13:34
cr500
Hey Jeffosso ,I contacted the gunsmith@CZ-usa link you gave me. He has a few bolts to suit. I will get a new bolt of him for $270. Good one.
27 March 2004, 14:09
jeffeosso
CR,
no problem, glad to help

please make sure it's headspaced or at least verified from a smith.

jeffe