Mod 70 pre 64 vs post for stock fit

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/314104816

07 February 2007, 04:24

drdlongshot

Mod 70 pre 64 vs post for stock fit

Is there a problem using a post 64 stock on a pre 64 .375 h&h Model 70?
Thanks

07 February 2007, 04:40

ForrestB

Only the fact that it doesn't fit.

______________________________
"Truth is the daughter of time."
Francis Bacon

07 February 2007, 06:29

jimmyd223

Another option is eBay and find a good used standard stock and have a smith open up the mag well. I think it is about 3/16" for the mag IIRC.

07 February 2007, 07:09

drdlongshot

Thanks for the reply. I have a pre64 that I bought a post mag. 70 on Ebay as I didn't want to use the old wood because of the possiblity of cracking. I also wanted to keep the old stock in an unmodified condition. I just was wondering how much modification I will have to do and if its possible.

07 February 2007, 08:29

djpaintles

The recoil lugs are in a different spot. It's pretty major surgery to convert one to other. I did it once and probably will avoid doing so again. It's a much better idea to just get the right stock........................DJ

....Remember that this is all supposed to be for fun!..................

07 February 2007, 20:32

22WRF

Longshot

I have a relatively cheap solution for you. I bought this stock for a project that I then sold the metalwork for. Its for a pre-64. There is some sap on the other side on the butt portion, but the butt is thick enough that I think it will work out. $200 shipped.

07 February 2007, 22:55

drdlongshot

22WRF, Thanks for the offer. I talked to my gunsmith and he said he will install the post 64 with little problem. I should have the stock in 3-4 days. If he changes his mind I will Email you.

07 February 2007, 23:09

GSP7

22wrf Thats not a GAG is it? Where did you get that one?