Mexican Mauser parts needed

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/2781044251

21 March 2011, 19:58

M1Tanker

Mexican Mauser parts needed

I posted this in the classifieds also. But the guys posting here are more likely to have the parts I need.

I am in need of some parts for a Mexican Mauser for a project I am working on.

Parts needed:

Mexican Mauser Extractor

Mexican Mauser Firing Pin

Mexican Mauser Cocking Piece

Please let me know if you have something available. You can reach me via PM here or email at wberger70@hotmail.com

William Berger

True courage is being scared to death but saddling up anyway. - John Wayne

The courageous may not live forever, but the timid do not live at all.

21 March 2011, 22:30

butchloc

don't have any mauser parts, but i'll be more than happy to send you some mexicans

21 March 2011, 22:58

Smokin Joe

quote:
William

William, I have some '93-'95 parts. Will they work?

Joe

22 March 2011, 01:19

ikesdad

Try Hoosier Gun Works for the firing pin.

Would'nt a standard 98 cocking piece work? Or are you looking for a 1936 Mexican, Springfield type? Hard to find as I've been looking for awhile.

22 March 2011, 03:43

Schrodinger's Cat

I think I still have one of the knurled nob cocking pieces if that is what you are looking for

22 March 2011, 03:51

ikesdad

If he isnt, I am.

22 March 2011, 03:55

Schrodinger's Cat

Pm me

22 March 2011, 05:14

M1Tanker

Schridingers Cat - I would love to purchase the cocking piece from you. PM sent.

ikesdad - yep - I am looking for one of the knurled cocking pieces. Thanks for the tip about Hoosiers. I will give them a try.

William Berger

True courage is being scared to death but saddling up anyway. - John Wayne

The courageous may not live forever, but the timid do not live at all.

23 March 2011, 06:23

M1Tanker

Still looking for mexican mauser parts. I have tried all the online sources and they all seem to be out.

William Berger

True courage is being scared to death but saddling up anyway. - John Wayne

The courageous may not live forever, but the timid do not live at all.

24 March 2011, 00:09

Don Markey

http://www.sarcoinc.com/mauser.html

Whole bolt $175 Kind of high maybe sell off the body to recoop something.They list extractors too $65, but if you want to pay that I'll send you one! Hoosier gun parts has new firing pins I think they are around $40
Don

26 March 2011, 02:14

Bohica

This is really a bit wild but, if you have the patience and a good Dremel, an extractor can be made from a Enfield P-17. Way off from perfect but it will work. As I recall you gotta grind down under the lip to get it to drop in a little then you will have to do a LOT of work on the collar . You end up with a usable, longer than needed extractor with a collar with the front milled off. It is far from perfect but it will work. I did one in Hawaii for a customer and it is still working. As the Turk 49s[?] are similar they "might" be usable too. I am truly surprised some innovative sort with a good mill and small kiln hasn`t CNCed a program and made these damn things!

Aloha, Mark