The Accurate Reloading Forums
to polish or not to polish

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/244109969

16 November 2008, 19:46
kwk
to polish or not to polish
Who polishes chambers after they are cut? If so what do you polish with, how fine? I have done both, polished and not polished.
16 November 2008, 19:51
Westpac
Most people polish chambers when they are finished cutting them. I use 320 grit and Scotch Brite pads. Worn ones for a finer finish.


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
16 November 2008, 20:37
Bill Meyer
thumb +1
17 November 2008, 04:42
D Humbarger
+2 for the scotch Brite pads.



Doug Humbarger
NRA Life member
Tonkin Gulf Yacht Club 72'73.
Yankee Station

Try to look unimportant. Your enemy might be low on ammo.
17 November 2008, 07:16
kwk
What color scotch brite?
17 November 2008, 09:37
Westpac
I use the green stuff sold in super markets.


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.