The Accurate Reloading Forums
CZ 527 American

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/2251066101

26 January 2009, 01:08
Greystone
CZ 527 American
Does anyone know how the butt plate on this rifle is fastend on. Its a 2 piece affair-rubber on plastic with no visible screws. I have to shorten the stock on one of these and don't really want to cut through any metal
26 January 2009, 04:54
bartsche
FrownerCan't see where it is screwed on. Mine looks like they used some sort of adhesive. You can easily contact the US importer and have him find out. fishingroger


Old age is a high price to pay for maturity!!! Some never pay and some pay and never reap the reward. Wisdom comes with age! Sometimes age comes alone..
26 January 2009, 04:58
AS64
Good question? Just looked at mine. Must be glued on.
26 January 2009, 05:13
tin can
Run a magnet over it so we know for sure- I have a 527, but the pad was replaced, not by me.
26 January 2009, 08:36
M1Tanker
you have to look very carefully but you will find 2 small slits in the rubber where the screws go through. But the pad is also epoxied on. I ran into this issue on my 527 when I re-finished the stock.


William Berger

True courage is being scared to death but saddling up anyway. - John Wayne

The courageous may not live forever, but the timid do not live at all.
27 January 2009, 02:23
Greystone
Hey Thanks M1 Tanker. I found the slits. I don't suppose you could tell me what kind of head the screws have. Dave
27 January 2009, 03:53
AS64
quote:
Originally posted by Greystone:
Hey Thanks M1 Tanker. I found the slits. I don't suppose you could tell me what kind of head the screws have. Dave
Most pads have phillips head screws.